Rules for OverpressureProtectionSECTION XIIIASME BPVC.XIII-20232023 ASME...
ð23PART KDDESIGN REQUIREMENTSARTICLE KD-1GENERALKD-100 SCOPEa The...
ASME BPVC.VIII.2-2023Division 2Alternative RulesSECTION VIIIRules for...
SECTION VIIIRules for Construction of Pressure VesselsASME...
Recommended Guidelinesfor the Care of Power BoilersSECTION VIIASME...
Viewed products
CII RR315-11...
IEEE 1003.5b-1996...
CSA Z9170-1:19 Terminal units for medical gas pipeline systems - Part 1: Terminal units for use with compressed medical gases, vacuum, and anaesthetic gas scavenging systems (Adopted ISO 9170-1:2017, third edition, 2017-07, with Canadian deviations) standard by CSA Group, 10/01/2019...
CSA Z10524-1:19 Pressure regulators for use with medical gases - Part 1: Pressure regulators and pressure regulators with flow-metering devices (Adopted ISO 10524-1:2018, second edition, 2018-01, with Canadian deviations) standard by CSA Group, 10/01/2019 Full Description...
CSA C828:19 Performance requirements for line voltage thermostats used with individual room electric space heating devices standard by CSA Group, 10/01/2019 Full Description Scope:1.1 General This Standard specifies performance requirements for thermostats (120 to 240 V)...
CSA S136-16 North American specification for the design of cold-formed steel structural members standard by CSA Group, 10/01/2019 Full Description A. GENERAL PROVISIONSThis chapter addresses the scope and applicability of the Specification, lists the definitions of the...
CSA O153:19 Poplar Plywood standard by CSA Group, 10/01/2019 Full Description Scope1.1 This Standard applies to exterior bond, all-veneer plywood that has a minimum of three plies and whose outermost plies have parallel grain direction. 1.2 This Standard specifies...
CSA O86:19 Engineering design in wood, Includes Errata 1 (2020), Errata 2 (2021), and Errata 3 (2021) standard by CSA Group, 10/01/2019 Full Description Preface:This is the eleventh edition of CSA O86, Engineering design in wood. It is presented in limit states design...
CSA 11.3:19/ANSI Z21.63:19 Portable type gas camp heaters standard by CSA Group, 09/01/2019 Full Description Scope1.1This Standard applies to unvented portable type gas camp heaters of the catalytic and infrared type only up to and including a maximum input of 12,000...
CSA B70:19 Cast iron soil pipe, fittings, and means of joining standard by CSA Group, 09/01/2019 Full Description Scope1.1 This Standard covers cast iron soil pipe, fittings, and means of joining for installation in gravity-flow plumbing systems inside and outside of...
CSA C22.2 NO. 291:19 Bare and covered ferrules, Includes Update 1 (2021) standard by CSA Group, 09/01/2019 Full Description Scope1.1 These requirements cover bare and covered ferrules intended for field wiring and factory wiring for use in accordance with the National...
CSA PLUS 4013:19 Technical guide: Development, interpretation and use of rainfall intensity-duration-frequency (IDF) information: Guideline for Canadian water resources practitioners standard by CSA Group, 09/01/2019 Full Description This Guideline has been designed for...
CSA C22.2 NO. 62841-4-2:19 Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 4-2: Particular requirements for hedge trimmers (Binational standard with UL 62841-4-2) standard by CSA Group, 09/01/2019 Full Description...
CSA N287.4:19 Construction, fabrication, and installation requirements for concrete containment structures for nuclear power plants standard by CSA Group, 09/01/2019 Full Description Scope1.1This Standard provides requirements for the construction, fabrication, and...