Rules for OverpressureProtectionSECTION XIIIASME BPVC.XIII-20232023 ASME...
ð23PART KDDESIGN REQUIREMENTSARTICLE KD-1GENERALKD-100 SCOPEa The...
ASME BPVC.VIII.2-2023Division 2Alternative RulesSECTION VIIIRules for...
SECTION VIIIRules for Construction of Pressure VesselsASME...
Recommended Guidelinesfor the Care of Power BoilersSECTION VIIASME...
WRC 367 Basis Of Current Dynamic Stress Criteria For Piping Bulletin / Circular by Welding Research Council, Inc., 1991 G. C. Slagis Full Description The appropriateness of seismic design requirements and methods for nuclear power plant piping has been of...
WRC 366 Recommended Practices in Elevated Temperature Design: A Compendium of Breeder Reactor Experiences (1970-1987): Volume IV- Special Topics Bulletin / Circular by Welding Research Council, Inc., 1991 A. K. Dhalla Full Description The purpose of this report...
WRC 365 Recommended Practices In Elevated Temperature Design: A Compendium Of Breeder Reactor Experiences (1970-1987): Volume III - Inelastic Analysis Bulletin / Circular by Welding Research Council, Inc., 1991 A. K. Dhalla Full Description The purpose of this...
WRC 363 Recommended Practices In Elevated Temperature Design: A Compendium Of Breeder Reactor Experiences (1970-1987): A Compendium Of Breeder Reactor Experiences (1970-1987): Volume II - Preliminary Design and Simplified Methods Bulletin / Circular by Welding Research Council, Inc., 1991...
WRC 362 Recommended Practices in Elevated Temperature Design: A Compendium of Breeder Reactor Experiences (1970-1987): Volume I - Current Status and Future Directions Bulletin / Circular by Welding Research Council, Inc., 1991 A. K. Dhalla Full Description The...
WRC 368 Stresses in Intersecting Cylinders Subjected to Pressure Bulletin / Circular by Welding Research Council, Inc., 1991 K. Mokhtarian, J. S. Endicott Full Description This Bulletin provides the designer with a simple and approximate method of calculating...
WRC 351 Part 1: An Analytical Comparison Of Short Crack And Deep Crack CTOD Fracture Specimens Of An A36 Steel; Part 2: The Effects Of Crack Depth On Elastic-Plastic CTOD Fracture Toughness; Part 3: A Comparison Of The J-Integral And CTOD Parameters For Short Crack Specimen Testing Bulletin / Circular by...
WRC 357 Calculation of Electrical and Thermal Conductivities of Metallurgical Plasmas Bulletin / Circular by Welding Research Council, Inc., 1990 G. J. Dunn, T. W. Eagar Full Description A simplified road map of the plasma physics literature for calculation of...
WRC 355 Programming and Control of Welding Processes - Experience Of The U.S.S.R. Bulletin / Circular by Welding Research Council, Inc., 1990 V. Malin Full Description The great potential of welding automation has long been recognized by welding-related...
WRC 353 Position Paper On Nuclear Plant Pipe Supports Bulletin / Circular by Welding Research Council, Inc., 1990 Pressure Vessel Research Committee Full Description The PVRC Technical Committee on Piping Systems has recognized that the piping system design...
WRC 352 Independent Support Motion (ISM) Method Of Modal Spectra Seismic Analysis Bulletin / Circular by Welding Research Council, Inc., 1990 Pressure Vessel Research Committee Full Description In October 1987, the PVRC Steering and Technical Committees on...
WRC 354 Part 1: Failure Analysis Of A Service-Exposed Hot Reheat Steam Line In A Utility Steam Plant; Part 2: The Influence Of Flux Composition On The Elevated Temperature Properties Of Cr-Mo Submerged Arc Weldments Bulletin / Circular by Welding Research Council, Inc., 1990 C. D....