Rules for OverpressureProtectionSECTION XIIIASME BPVC.XIII-20232023 ASME...
ð23PART KDDESIGN REQUIREMENTSARTICLE KD-1GENERALKD-100 SCOPEa The...
ASME BPVC.VIII.2-2023Division 2Alternative RulesSECTION VIIIRules for...
SECTION VIIIRules for Construction of Pressure VesselsASME...
Recommended Guidelinesfor the Care of Power BoilersSECTION VIIASME...
Viewed products
AWWA IMTECH59612...
ASME B29.25M-1994...
WRC 290 Factors Affecting Porosity in Aluminum Welds - A Review Bulletin / Circular by Welding Research Council, Inc., 1983 J. H. Devletian, W. E. Wood Full Description A literature review was conducted to determine the factors affecting porosity in welds...
WRC 289 Hot Cracking Susceptibility of Austenitic Stainless Steel Weld Metals Bulletin / Circular by Welding Research Council, Inc., 1983 C.D. Lundin, C.P.D. Chow Full Description The primary purpose of the present research was to investigate the influence of...
WRC 288 Fracture of Pipelines and Cylinders Containing a Circumferential Crack Bulletin / Circular by Welding Research Council, Inc., 1983 F. Erdogan, H. Ezzat Full Description This study is concerned with the problem of a pipe containing a part-through or a...
WRC 287 Welding of Copper and Copper Base Alloys Bulletin / Circular by Welding Research Council, Inc., 1983 R. J. C. Dawson Full Description This Report discusses the current status of fusion welding technology for copper-based materials of major industrial...
WRC 286 Fatigue Behavior of Aluminum Alloy Weldments Bulletin / Circular by Welding Research Council, Inc., 1983 W. W. Sanders Jr., R. H. Day Full Description This report provides a summary and overview of the fatigue behavior of aluminum alloy weldments. In...
WRC 285 Part 1: Stress Indices and Flexibility Factors for Concentric Nozzles Bulletin / Circular by Welding Research Council, Inc., 1983 E. C. Rodabaugh, S. E. Moore Full Description Stress indices and the appropriate simplified design formulas are developed...
WRC 274 Part 1: International Benchmark Project on Simplified Methods for Elevated Temperature Design and Analysis; Problem II: The Saclay Fluctuating Sodium Level Experiment; Comparison on Analytical & Experimental Results; Problem III: The Oak Ridge Nozzle to Sphere Attachment Bulletin / Circular by...
WRC 278 The Crack Arrest Properties of 9% Nickel Steels for Cryogenic Applications Bulletin / Circular by Welding Research Council, Inc., 1982 R. D. Stout, A. W. Pense Full Description A review and analysis are presented of the literature on the fracture...
WRC 277 High Temperature Properties of 2 1/4 Cr-1 Mo Weld Metal Bulletin / Circular by Welding Research Council, Inc., 1982 C.D. Lundin, B.J. Kruse, M.R. Pendley Full Description 2 Cr-1 Mo is a low-alloy ferritic steel used primarily for high temperature...
WRC 276 A Summary and Critical Evaluation of Stress Intensity Factor Solutions of Corner Cracks at the Edge of a Hole Bulletin / Circular by Welding Research Council, Inc., 1982 R.L. Cloud, S.S. Palusamy Full Description Modern pressure vessel code rules such...
WRC 275 The Use of Quenched and Tempered 2 1/4 Cr-1 Mo Steel for Thick Wall Reactor Vessels in Petroleum Refinery Processes: An Interpretive Review of 25 Years of Research and Application Bulletin / Circular by Welding Research Council, Inc., 1982 W.E. Erwin, J.G. Kerr Full...
WRC Volume 37 No. 02 1982 Progress Reports Volume 37 No. 02 1982 Report / Survey by Welding Research Council, Inc., 1982 Welding Research Council, Inc. Full Description CONTENTSUtilities Advisory Committee- Meeting Minutes, October 1, 1981- Interpretive Reports...