Rules for OverpressureProtectionSECTION XIIIASME BPVC.XIII-20232023 ASME...
ð23PART KDDESIGN REQUIREMENTSARTICLE KD-1GENERALKD-100 SCOPEa The...
ASME BPVC.VIII.2-2023Division 2Alternative RulesSECTION VIIIRules for...
SECTION VIIIRules for Construction of Pressure VesselsASME...
Recommended Guidelinesfor the Care of Power BoilersSECTION VIIASME...
Viewed products
ASME PTC 40-2017...
WRC 005...
WRC 033 Further Studies of the Hot-Ductility of High-Temperature Alloys Bulletin / Circular by Welding Research Council, Inc., 1957 E.F. Nippes, W.F. Savage, G. Grotke Full Description The following constitutes an interim report of progress on the...
WRC 024 Nickel and High-Nickel Alloys for Pressure Vessels Bulletin / Circular by Welding Research Council, Inc., 1956 R.M. Wilson, Jr., W.F. Burchfield Full Description An interpretive report prepared for the Materials Division of the Pressure Vessel Research...
WRC 030 Oxidation-Resistant Brazing Alloys Bulletin / Circular by Welding Research Council, Inc., 1956 G.H. Sistare, Jr., A.S. McDonald Full Description During the period from June 30, 1953 to Dec. 31, 1954 some 117 experimental brazing alloys were prepared at...
WRC 029 Development of Brazing Alloys for Joining Heat Resistant Alloys Bulletin / Circular by Welding Research Council, Inc., 1956 F.M. Miller, H.S. Gonser, R.L. Peaslee Full Description Fifteen different alloy systems were tested and studied for brazing...
WRC 028 Aluminum and Aluminum Alloys for Pressure Vessels Bulletin / Circular by Welding Research Council, Inc., 1956 M. Holt Full Description An interpretive report prepared for the Materials Division of the Pressure Vessel Research Committee; discusses...
WRC 027 Part 1: Mechanical Properties and Weldability of Six High-Strength Steels Bulletin / Circular by Welding Research Council, Inc., 1956 R.D. Stout, J.H. Gross Full Description The Pressure Vessel Research Committee selected six high-strength steels...
WRC 026 Investigation of the Influence of Deoxidation and Chemical Composition on Notched-Bar Properties Of Ship Plate Steels Bulletin / Circular by Welding Research Council, Inc., 1956 F. W. Boulger, R. H. Frazier, C. H. Lorig Full Description Results of an...
WRC 025 Bibliography on the Welding of Stainless Steels, 1926-1955 with Author Index Bulletin / Circular by Welding Research Council, Inc., 1956 K. Janis Full Description Bibliography On The Welding Of Stainless Steels, 1926-1955 With Author Index...
WRC 020 Part 1: High-Strength Low Alloy Steels Bulletin / Circular by Welding Research Council, Inc., 1955 C. M. Parker Full Description This paper which deals partly with interesting or novel applications of high-strength, low-alloy steels in the automotive...
WRC 023 Cracking of Simple Structural Geometries Bulletin / Circular by Welding Research Council, Inc., 1955 S.T. Carpenter, R.F. Linsenmeyer Full Description This report presents the results of an investigation concerning the general subject of the cracking of...
WRC 022 Welded Tee Connections Bulletin / Circular by Welding Research Council, Inc., 1955 A.G. Barklow, R.A. Huseby Full Description Strain measurements and hydrostatic tests on welded tee connections in large diameter gas transmission pipe.A study program was...
WRC 021 Coating Moisture Investigations of Austenitic Electrodes of the Modified 18-8 Type Bulletin / Circular by Welding Research Council, Inc., 1955 K. P. Johannes, D. C. Smith, W. G. Rinehart Full Description Rates of moisture absorption by the coatings of...