Rules for OverpressureProtectionSECTION XIIIASME BPVC.XIII-20232023 ASME...
ð23PART KDDESIGN REQUIREMENTSARTICLE KD-1GENERALKD-100 SCOPEa The...
ASME BPVC.VIII.2-2023Division 2Alternative RulesSECTION VIIIRules for...
SECTION VIIIRules for Construction of Pressure VesselsASME...
Recommended Guidelinesfor the Care of Power BoilersSECTION VIIASME...
3A 26-06 Sanitary Standards for Sifters for Dry Products standard by 3-A Sanitary Standards, 12/08/2019 Full Description 3A 26-06 applies to the sanitary aspects of sifters used for processing dry products beginning at, as appropriate, the inlets for products, cleaning...
3A 83-01 Enclosed Cheese Vats and Tables standard by 3-A Sanitary Standards, 11/30/2019 Full Description These standards cover the sanitary aspects of enclosed cheese vats and tables used in the batch production of cheese curd and open vats that are covered during...
3A 70-03 Sanitary Standards for Italian-Type Pasta Filata Style Cheese Cookers standard by 3-A Sanitary Standards, 11/30/2019 Full Description The equipment covered by these standards may include unitized sections that act as receiving reservoirs, pre-heat or cooking...
3A 46-04 Refractometers and Energy Absorbing Optical Sensors standard by 3-A Sanitary Standards, 11/01/2019 Full Description This 3-A Sanitary Standard 46-04 applies to the sanitary aspects of refractometers and energy absorbing optical sensors used on fluid products...
3A 88-01 Equipment Feet and Supports standard by 3-A Sanitary Standards, 10/23/2019 Full Description 3A 88-01 covers the sanitary aspects of machine leveling feet and supports used on equipment in a wet processing area of dairy, food and other comestible products plants,...
3A 63-04 Sanitary Fittings standard by 3-A Sanitary Standards, 09/21/2019 Full Description This 3-A Sanitary Standard applies to the sanitary aspects of fittings used on processing equipment and pipelines which hold or convey products. The fitting begins at the equipment...
3A 78-03 Spray Cleaning Devices Intended to Remain in Place standard by 3-A Sanitary Standards, 04/01/2019 Full Description These standards cover the sanitary aspects of spray cleaning devices attached to stainless steel solution supply tubes intended to remain in place...
3A 74-07 Sanitary Standards for Sensors and Sensor Fittings and Connections standard by 3-A Sanitary Standards, 03/14/2019 Full Description 3A 74-07 applies to the sanitary aspects of sensors and sensor fittings andconnections. The sensor begins at the instrument...
3A 28-06 Flow Meters standard by 3-A Sanitary Standards, 02/01/2019 Full Description These standards cover the sanitary aspects of flow portion of any device integral with the meter such as strainers, temperature sensors and density sensors, which is in contact with the...
3A 61-02 Steam Injection Heaters standard by 3-A Sanitary Standards, 11/25/2018 Full Description 3A 61-02 covers the sanitary aspects of steam injection heaters used to heat milk or milk products when the heater is on processing equipment or in the pipelines conveying...
3A 78-02 Spray Cleaning Devices Intended to Remain in Place standard by 3-A Sanitary Standards, 08/26/2018 Full Description These standards cover the sanitary aspects of spray cleaning devices attached to stainless steel solution supply tubes intended to remain in place...
3A 81-01 Auger-Type Feeders standard by 3-A Sanitary Standards, 08/23/2018 Full Description English Description: These standards cover the sanitary aspects of auger-type feeders used to convey, at a controlled rate, dry milk, dry milk products and dry milk products and...