Rules for OverpressureProtectionSECTION XIIIASME BPVC.XIII-20232023 ASME...
ð23PART KDDESIGN REQUIREMENTSARTICLE KD-1GENERALKD-100 SCOPEa The...
ASME BPVC.VIII.2-2023Division 2Alternative RulesSECTION VIIIRules for...
SECTION VIIIRules for Construction of Pressure VesselsASME...
Recommended Guidelinesfor the Care of Power BoilersSECTION VIIASME...
SAE AMS5660M Nickel-Iron Alloy, Corrosion and Heat-Resistant, Bars and Forgings 12.5Cr - 42.5Ni - 6.0Mo - 2.7Ti - 0.015B - 34Fe Consumable Electrode Remelted or Vacuum Induction Melted Solution, Stabilization, and Precipitation Heat Treated standard by SAE International, 06/15/2020...
SAE AS3118B BOLT, MACHINE - HEXAGON HEAD, DRILLED 6 HOLES, PD SHANK, AMS5731, UNS S66286, .4375-20 UNJF-3A standard by SAE International, 06/15/2020 Full Description Scope is unavailable. Product Details Published:...
SAE AS3117B BOLT, MACHINE - HEXAGON HEAD, DRILLED 6 HOLES, PD SHANK, AMS5731, UNS S66286, .375-24 UNJF-3A standard by SAE International, 06/15/2020 Full Description Scope is unavailable. Product Details Published:...
SAE AS3116B BOLT, MACHINE - HEXAGON HEAD, DRILLED 6 HOLES, PD SHANK, AMS5731, UNS S66286, .3125-24 UNJF-3A standard by SAE International, 06/15/2020 Full Description Scope is unavailable. Product Details Published:...
SAE ARP6157A Pressure-Viscosity Coefficient Measurement standard by SAE International, 06/15/2020 Full Description The lubricant performance capability for aero propulsion drive systems is derived from the physical properties of the oil and performance attributes...
SAE AMS4082R Aluminum Alloy, Seamless Drawn Tubing 1.0Mg - 0.60Si - 0.28Cu - 0.20Cr (6061-T6) Solution and Precipitation Heat Treated standard by SAE International, 06/11/2020 Full Description This specification covers an aluminum alloy in the form of seamless, drawn...
SAE AS6286B Aircraft Ground Deicing/Anti-Icing Training and Qualification Program standard by SAE International, 06/11/2020 Full Description This document establishes the minimum training and qualification requirements for ground-based aircraft deicing/anti-icing methods...
SAE AS4407B FITTING ASSEMBLY, ELBOW 90¿¿, REDUCER AND NONREDUCER, INTERNAL FLARE TO FLARED TUBE standard by SAE International, 06/11/2020 Full Description SCOPE IS UNAVAILABLE. Product Details Published: 06/11/2020...
SAE ARP4102/12B Approach to Landing Guidance System for Transport Aircraft standard by SAE International, 06/11/2020 Full Description This document specifies requirements for an Approach to Landing Guidance System (ALGS) electronic device. This equipment shall display...
SAE AS1501D Hose, Air Duct, Flexible, Nonmetallic, Aircraft standard by SAE International, 06/10/2020 Full Description This document covers flexible and semiflexible, reinforced and unreinforced air hoses fabricated from laminated and impregnated fabric, intended for use...
SAE AS5971D FITTING ASSEMBLY, ELBOW, 45¿¿, AXIALLY SWAGED, HYDRAULIC, 5080 PSI standard by SAE International, 06/10/2020 Full Description SCOPE IS UNAVAILABLE. Product Details Published: 06/10/2020 Number of...
SAE AIR6334 A Guide to Extending Times Between Overhaul for Rotorcraft Power Train Transmissions Using Monitoring Data standard by SAE International, 06/09/2020 Full Description Time in Service (TIS), or flight hours, logged in maintenance records against an installed...