Rules for OverpressureProtectionSECTION XIIIASME BPVC.XIII-20232023 ASME...
ð23PART KDDESIGN REQUIREMENTSARTICLE KD-1GENERALKD-100 SCOPEa The...
ASME BPVC.VIII.2-2023Division 2Alternative RulesSECTION VIIIRules for...
SECTION VIIIRules for Construction of Pressure VesselsASME...
Recommended Guidelinesfor the Care of Power BoilersSECTION VIIASME...
Viewed products
ISO 15011-2:2009...
SAE AIR6236 In-House Verification of EMI Test Equipment standard by SAE International, 12/13/2015 Full Description This AIR provides guidance to the EMI test facility on how to check performance of the following types of EMI test equipment:Current probe Line Impedance...
SAE AMS6395H Steel Sheet, Strip, and Plate 0.95Cr - 0.20Mo - (0.38 - 0.43C) (SAE 4140) standard by SAE International, 12/09/2015 Full Description This specification covers an aircraft quality, low alloy steel in the form of sheet, strip, and plate....
SAE AMS4768J Silver Alloy, Brazing Filler Metal 35Ag - 26Cu - 21Zn - 18Cd 1125 to 1295 ¿¿F (607 to 702 ¿¿C) Solidus-Liquidus Range (Stabilized: Dec 2015) standard by SAE International, 12/08/2015 Full Description This specification covers a silver alloy in the form of...
SAE AMS4769G Silver Alloy, Brazing Filler Metal 45Ag - 24Cd - 16Zn - 15Cu 1125 to 1145 ¿¿F (607 to 618 ¿¿C) Solidus-Liquidus Range (Stabilized: Dec 2015) standard by SAE International, 12/08/2015 Full Description This specification covers a silver alloy in the form of...
SAE AMSR83248/1A Rubber, Fluorocarbon Elastomer, High Temperature, Fluid and Compression Set Resistant (O-Rings, Class 1, 75 Hardness) standard by SAE International, 12/08/2015 Full Description The purpose of this specification sheet is to set up a standardized part...
SAE AMS4771J Silver Alloy, Brazing Filler Metal 50Ag - 16Cd - 15.5Zn - 15.5Cu - 3.0Ni 1170 to 1270 ¿¿F (632 to 688 ¿¿C) Solidus-Liquidus Range (Stabilized: Dec 2015) standard by SAE International, 12/08/2015 Full Description This specification covers a silver alloy in...
SAE AMS4770L Silver Alloy Brazing Filler Metal 50Ag - 18Cd - 16.5Zn - 15.5Cu 1160 to 1175 ¿¿F (627 to 635 ¿¿C) Solidus-Liquidus Range (Stabilized: Dec 2015) standard by SAE International, 12/08/2015 Full Description This specification covers a silver alloy in the form of...
SAE AIR4127A Steel: Chemical Composition and Hardenability (Stabilized: Dec 2015) standard by SAE International, 12/06/2015 Full Description This document, as referenced in the applicable product specifications in procurement documents, contains:a. A catalog of the...
SAE AS85049/124C CONNECTOR ACCESSORIES, ELECTRICAL, STRAIN RELIEF, STRAIGHT SELF-LOCKING, AND NON-SELF-LOCKING CATEGORY 4C (FOR MIL-DTL-38999 SERIES III AND IV CONNECTORS) standard by SAE International, 12/06/2015 Full Description SCOPE IS UNAVAILABLE....
SAE AS6254A Minimum Performance Standard for Low Frequency Underwater Locating Devices (Acoustic) (Self-Powered) standard by SAE International, 12/06/2015 Full Description This SAE Aerospace Standard (AS) covers ULDs utilized in finding submerged aircraft. Such ULDs are...
SAE AS45909A Stud, Locked In, Ring Locked, Serrated, General Specification For standard by SAE International, 12/06/2015 Full Description The specification covers the requirements for locked-in studs. The method of locking in the stud is by means of a serrated collar and...
SAE ARP6338 Process for Assessment and Mitigation of Early Wearout of Life-limited Microcircuits standard by SAE International, 12/06/2015 Full Description This document is intended for use by designers, reliability engineers, and others associated with the design,...