Rules for OverpressureProtectionSECTION XIIIASME BPVC.XIII-20232023 ASME...
ð23PART KDDESIGN REQUIREMENTSARTICLE KD-1GENERALKD-100 SCOPEa The...
ASME BPVC.VIII.2-2023Division 2Alternative RulesSECTION VIIIRules for...
SECTION VIIIRules for Construction of Pressure VesselsASME...
Recommended Guidelinesfor the Care of Power BoilersSECTION VIIASME...
Viewed products
BS PD ISO/TS 22393:2021 Security...
SAE AMS3798C Webbing, Low Modulus Aramid (Stabilized: Apr 2015) standard by SAE International, 04/13/2015 Full Description This specification covers low-modulus aramid in the form of webbing. This product has been used in construction of parachutes, but usage is not...
SAE AMS3797C Webbing, Nylon, Integral Locking Slots (Stabilized: Apr 2015) standard by SAE International, 04/13/2015 Full Description This specification covers nylon webbing with integral locking slots.This webbing has been used typically in construction of parachutes,...
SAE AMS3820B Tape, Nylon Cloth For Ring-Slot Parachutes (Stabilized: Apr 2015) standard by SAE International, 04/13/2015 Full Description This specification covers a nylon cloth in the form of tape.This tape has been used typically in construction of canopies of ribbon...
SAE AMS3809A Tape, Adhesive, Pressure-Sensitive Double-Faced, Carpet Tie Down (Stabilized: Apr 2015) standard by SAE International, 04/13/2015 Full Description This specification covers a fabric in the form of a double-faced, pressure-sensitive, adhesive tape....
SAE AMS3808B Tape, Adhesive, Pressure-Sensitive Masking (Stabilized: Apr 2015) standard by SAE International, 04/13/2015 Full Description This specification covers three types of masking materials in the form of pressure-sensitive adhesive tape.This tape has been used...
SAE AMS5045J Steel, Sheet and Strip 0.25 Carbon, Maximum Hard Temper standard by SAE International, 04/10/2015 Full Description This specification covers a carbon steel in the form of sheet and strip. Product Details...
SAE J3081_201504 Heavy Vehicle Controls Prioritization and Conflict Resolution standard by SAE International, 04/10/2015 Full Description This document is written to address acceleration and deceleration control issues related to Heavy Duty Trucks and Buses greater than...
SAE AMS5659R Steel, Corrosion-Resistant, Bars, Wire, Forgings, Rings, and Extrusions 15Cr - 4.5Ni - 0.30Cb (Nb) - 3.5Cu standard by SAE International, 04/10/2015 Full Description This specification covers a corrosion-resistant steel in the form of bars, wire, forgings,...
SAE AMS5629/H1000A Steel, Corrosion-Resistant, Bars, Wire, Forgings, Rings, and Extrusions 13Cr - 8.0Ni - 2.2Mo - 1.1Al Vacuum Induction Plus Consumable Electrode Melted Solution Heat Treated, Precipitation Hardened (H1000) standard by SAE International, 04/10/2015 Full Description...
SAE J1339_201504 Test Method for Measuring Performance of Engine Cooling Fans standard by SAE International, 04/09/2015 Full Description This SAE Recommended Practice is intended for use in testing and evaluating the approximate performance of engine-driven cooling fans....
SAE AS5756/7 CABLE, LOW INDUCTANCE, 270 VOLT DC standard by SAE International, 04/09/2015 Full Description Scope unavailable. Product Details Published: 04/09/2015 File Size: 1...
SAE AMS5352F Steel, Corrosion-Resistant, Investment Castings 17Cr - 0.55Mo (0.95 - 1.20C) Annealed standard by SAE International, 04/09/2015 Full Description This specification covers a corrosion resistant steel in the form of investment castings.These castings have been...