Rules for OverpressureProtectionSECTION XIIIASME BPVC.XIII-20232023 ASME...
ð23PART KDDESIGN REQUIREMENTSARTICLE KD-1GENERALKD-100 SCOPEa The...
ASME BPVC.VIII.2-2023Division 2Alternative RulesSECTION VIIIRules for...
SECTION VIIIRules for Construction of Pressure VesselsASME...
Recommended Guidelinesfor the Care of Power BoilersSECTION VIIASME...
SAE AMS4090F Aluminum Alloy, Plate 5.7Zn - 2.2Mg - 1.6Cu - 0.22Cr (7475-T651) Solution Heat Treated, Stress Relieved, and Precipitation Heat Treated standard by SAE International, 01/15/2015 Full Description This specification covers an aluminum alloy in the form of...
SAE AMS4930H Titanium Alloy Bars, Wire, Forgings, and Rings 6Al - 4V, Extra Low Interstitial Annealed standard by SAE International, 01/15/2015 Full Description This specification covers a titanium alloy in the form of bars, wire, forgings, flash welded rings 4.000...
SAE AMS4520L Leaded Phosphor Bronze Strip 88.5Cu - 4.0Sn - 4.0Pb - 3.0Zn - 0.26P Cold Rolled, Half Hard (HO2) standard by SAE International, 01/15/2015 Full Description This specification covers a copper alloy in the form of strip. This strip has been used typically for...
SAE ARP1833B Sealing Techniques for Missile Applications standard by SAE International, 01/15/2015 Full Description The purpose of this standard is to provide the missile hydraulic and pneumatic component designer with information learned, tested and substantiated in...
SAE AMS5708L Nickel Alloy, Corrosion and Heat-Resistant, Bars, Wire Forgings, and Rings 58Ni - 19.5Cr - 13.5Co - 4.3Mo - 3.0Ti - 1.4Al - 0.05Zr - 0.006B Consumable Electrode or Vacuum Induction Melted 1975 ¿¿F (1079 ¿¿C) Solution Heat Treated standard by SAE International, 01/15/2015...
SAE AMS5660L Nickel-Iron Alloy, Corrosion and Heat-Resistant, Bars and Forgings 12.5Cr - 42.5Ni - 6.0Mo - 2.7Ti - 0.015B - 34Fe Consumable Electrode Remelted or Vacuum Induction Melted Solution, Stabilization, and Precipitation Heat Treated standard by SAE International, 01/15/2015...
SAE AMS5622/H1025 Steel, Corrosion-Resistant, Bars, Wire, Forgings, Tubing, and Rings 16Cr - 4.0Ni - 0.30Cb - 4.0Cu Solution Heat Treated, Precipitation Hardened (H1025) Consumable Electrode Remelted standard by SAE International, 01/15/2015 Full Description This...
SAE AMS4987E Titanium Alloy, Forgings 10V - 2Fe - 3AI Consumable Electrode Melted, Single-Step Solution Heat Treated and Overaged 140 ksi (965 MPa) Tensile Strength standard by SAE International, 01/15/2015 Full Description This specification covers a titanium alloy in...
SAE AMS4986E Titanium Alloy, Forgings 10V - 2Fe - 3Al Consumable Electrode Melted, Single-Step Solution Heat Treated and Overaged 160 ksi (1103 MPa) Tensile Strength standard by SAE International, 01/15/2015 Full Description This specification covers a titanium alloy in...
SAE AMS4950D Titanium Alloy, Bars, Wire, Forgings, and Rings 6.0Al - 4.0V Solution Heat Treated and Aged Modified Strength standard by SAE International, 01/15/2015 Full Description This specification covers a titanium alloy in the form of bars, wire, forgings, and flash...
SAE AMS4934G Titanium Alloy, Extrusions and Flash Welded Rings 6Al - 4V Solution Heat Treated and Aged standard by SAE International, 01/15/2015 Full Description This specification covers a titanium alloy in the form of extruded bars, and shapes, flash welded rings up...
SAE AMS5704K Nickel Alloy, Corrosion and Heat-Resistant, Forgings 57Ni - 19.5Cr - 13.5Co - 4.3Mo - 3.0Ti - 1.4Al - 0.05Zr - 0.006B Consumable Electrode or Vacuum Induction Melted 1825 to 1900 ¿¿F (996 to 1038 ¿¿C) Solution, Stabilization, and Precipitation Heat Treated standard by SAE International,...