Rules for OverpressureProtectionSECTION XIIIASME BPVC.XIII-20232023 ASME...
ð23PART KDDESIGN REQUIREMENTSARTICLE KD-1GENERALKD-100 SCOPEa The...
ASME BPVC.VIII.2-2023Division 2Alternative RulesSECTION VIIIRules for...
SECTION VIIIRules for Construction of Pressure VesselsASME...
Recommended Guidelinesfor the Care of Power BoilersSECTION VIIASME...
SAE AMS4161J Aluminum Alloy, Extrusions 1.0Mg - 0.60Si - 0.28Cu - 0.20Cr (6061-T4) Solution Heat Treated and Naturally Aged standard by SAE International, 12/03/2020 Full Description This specification covers an aluminum alloy in the form of extruded bars, rods, wire,...
SAE AS39029/9C CONTACTS, ELECTRICAL CONNECTOR, PIN, CRIMP REMOVABLE, THERMOCOUPLE, (FOR MIL-DTL-26482 SERIES 2, AS81703 SERIES 3, MIL-DTL-83723 SERIES I AND III, AND MIL-DTL-83733 CONNECTORS) standard by SAE International, 12/01/2020
SAE AS39029/27B CONTACTS, ELECTRICAL CONNECTOR, SOCKET, CRIMP REMOVABLE, SHIELDED, SIZE 12 (FOR MIL-DTL-38999 SERIES II CONNECTORS) standard by SAE International, 12/01/2020
SAE AS39029/75B CONTACTS, ELECTRICAL CONNECTOR, SOCKET, CRIMP REMOVABLE, SHIELDED, SIZE 12 (FOR MIL-DTL-38999 SERIES I, III, AND IV CONNECTORS) standard by SAE International, 12/01/2020
SAE ARP1840B Aircraft Engine Transport Devices standard by SAE International, 11/30/2020 Full Description Types of engine transport devices: this document establishes two types of engine transport devices: type A for split engine pack transport (mainly lower deck) and...
SAE J2288_202011 Life Cycle Testing of Electric Vehicle Battery Modules (Stabilized: Nov 2020) standard by SAE International, 11/30/2020 Full Description This SAE Recommended Practice defines a standardized test method to determine the expected service life, in...
SAE J1628_202011 Technician Procedures for Refrigerant Leak Detection in Service of Mobile Air Conditioning Systems standard by SAE International, 11/30/2020 Full Description This SAE Recommended Practice applies to the use, by automotive service technicians, of...
SAE AS5590B Connectors, Fiber Optic, Advanced, Circular or Rectangular, Plug and Receptacle, Environment Resistant, Removable Termini/Contacts, General Specification For (Stabilized: Nov 2020) standard by SAE International, 11/30/2020 Full Description This...
SAE ARP1232C Gland Design Criteria and Dimensions for Static Radial O-Ring Seal Applications Without Anti-Extrusion Devices Specifically for Engine and Engine Control Systems standard by SAE International, 11/30/2020 Full Description This document recommends standard...
SAE AMS4330D Aluminum Alloy, Plate (2297-T87) 2.8Cu - 1.5Li - 0.30Mn - 0.12Zr Solution Heat Treated, Stretched, and Artificially Aged standard by SAE International, 11/30/2020 Full Description This specification covers an aluminum alloy in the form of plate 1.500 to...
SAE AIR6325 Fuel Level Point Sensing standard by SAE International, 11/30/2020 Full Description This report is intended to identify the various existing technologies used for a fuel level sensing system. In addition to sensing technologies, it describes the basic...
SAE ARP1554D Vehicle Transport Unit Load Device (ULD) standard by SAE International, 11/30/2020 Full Description This document provides functional, dimensional, structural, and environmental requirements for vehicle transport devices used to transport vehicles in...