Rules for OverpressureProtectionSECTION XIIIASME BPVC.XIII-20232023 ASME...
ð23PART KDDESIGN REQUIREMENTSARTICLE KD-1GENERALKD-100 SCOPEa The...
ASME BPVC.VIII.2-2023Division 2Alternative RulesSECTION VIIIRules for...
SECTION VIIIRules for Construction of Pressure VesselsASME...
Recommended Guidelinesfor the Care of Power BoilersSECTION VIIASME...
IEEE 82-2002 IEEE Standard Test Procedure for Impulse Voltage Tests on Insulated Conductors standard by IEEE, 03/03/2003 Full Description Scope This test procedure applies to both switching impulse and lightning impulse tests on cables or cable systems incorporating...
IEEE 2001-2002 IEEE Recommended Practice for the Internet - Web Site Engineering, Web Site Management and Web Site Life Cycle standard by IEEE, 03/03/2003 Full Description Scope This document defines recommended practices for World Wide Web page engineering for Intranet...
IEEE 1413.1-2002 IEEE Guide for Selecting and Using Reliability Predictions Based on IEEE 1413 standard by IEEE, 02/19/2003 Full Description Scope Processes and methodologies for conducting reliability predictions for electronic systems and equipment. Purpose...
IEEE 484-2002 IEEE Recommended Practice for Installation Design and Installation of Vented Lead-Acid Batteries for Stationary Applications standard by IEEE, 02/12/2003 Full Description Scope This recommended practice provides recommended design practices and procedures...
IEEE 1541-2002 IEEE Standard for Prefixes for Binary Multiples standard by IEEE, 02/12/2003 Full Description Scope This standard will define prefixes that denote multiplication of a unit by the binary multiplier 2^10 and integral powers thereof. The prefixes are for use...
IEEE 1175.1-2002 IEEE Guide for CASE Tool Interconnections - Classification and Description standard by IEEE, 02/09/2003 Full Description Scope This guide describes the scope of application and interrelationships for the members of the IEEE 1175 family of standards, and...
IEEE C95.4-2002 IEEE Recommended Practice for Determining Safe Distances From Radio Frequency Transmitting Antennas When Using Electric Blasting Caps During Explosive Operations standard by IEEE, 02/09/2003 Full Description Scope This project provides recommended...
IEEE C37.22-2003 American National Standard Preferred Ratings and Related Required Capabilities for Indoor AC Medium-Voltage Switches Used in Metal-Enclosed Switchgear standard by IEEE, 02/05/2003 Full Description Scope This standard provides preferred ratings for indoor...
IEEE 1536-2002 IEEE Standard for Rail Transit Vehicle Battery Physical Interface standard by IEEE, 01/31/2003 Full Description Scope This standard prescribes the maximum dimensional requirements of each battery tray for a specific number of cells and battery capacity...
IEEE N323D-2002 American National Standard for Installed Radiation Protection Instrumentation standard by IEEE, 01/27/2003 Full Description New IEEE Standard - Active.Requirements for installed instruments that measure dose, dose rate, and equivalent dose or dose rate...
IEEE C95.3-2002 IEEE Recommended Practice for Measurements and Computations of Radio Frequency Electromagnetic Fields With Respect to Human Exposure to Such Fields, 100 kHz-300 GHz standard by IEEE, 01/11/2003 Full Description Scope Revise and develop specifications for...
IEEE 1532-2002 IEEE Standard for In-System Configuration of Programmable Devices standard by IEEE, 01/10/2003 Full Description Scope This standard describes a series of mandatory and optional programming instructions and associated data registers that define a standard...