No products
View larger
ASME RTP-1-2019
M00049956
New product
ASME RTP-1-2019 Reinforced Thermoset Plastic Corrosion-Resistant Equipment
standard by ASME International, 12/31/2019
Full Description
This Standard applies to stationary reinforced thermoset plastic corrosion resistant vessels used for the storage, accumulation, or processing of corrosive or other substances at pressures not exceeding 15 psig external and/or 15 psig internal above any hydrostatic head.In stock
More info
ASME RTP-1–2019
(Revision of ASME RTP-1–2017)
Reinforced Thermoset Plastic Corrosion-Resistant Equipment
AN A MERICAN NA TIONAL S T AND ARD
ASME RTP-1–2019
(Revision of ASME RTP-1–2017)
ASME RTP-1–2019
(Revision of ASME RTP-1–2017)
Reinforced
Thermoset Plastic Corrosion-Resistant Equipment
AN AMERICAN NATIONAL STANDARD
Date of Issuance: December 31, 2019
The next edition of this Standard is scheduled for publication in 2021. This Standard will become effective 6 months after the Date of Issuance.
ASME issues written replies to inquiries concerning interpretations of technical aspects ofthis Standard. Periodically certain actions of the ASME RTP Committee may be published as Cases.Cases and interpretations are published on the ASME website under the Committee Pages at https://cstools.asme.org/ as they are issued.
Errata to codes and standards may be posted on the ASME website under the Committee Pages to provide corrections to incorrectly published items, or to correct typographical or grammatical errors in codes and standards. Such errata shall be used on the date posted.
The Committee Pages can be found at https://cstools.asme.org/. There is an option available to automatically receive an e-mail notification when errata are posted to a particular code or standard. This option can be found on the appropriate Committee Page after selecting “Errata” in the “Publication Information” section.
ASME is the registered trademark of The American Society of Mechanical Engineers.
This code or standard was developed under procedures accredited as meeting the criteria for American National Standards. The Standards Committee that approved the code or standard was balanced to assure that individuals from competent and concerned interests have had an opportunity to participate. The proposed code or standard was made available for public review and comment that provides an opportunity for additional public input from industry, academia, regulatory agencies, and the public-at-large.
ASME does not “approve,” “rate,” or “endorse” any item, construction, proprietary device, or activity.
ASME does not take any position with respect to the validity of any patent rights asserted in connection with any items mentioned in this document, and does not undertake to insure anyone utilizing a standard against liability for infringement of any applicable letters patent, nor assume any such liability. Users of a code or standard are expressly advised that determination of the validity of any such patent rights, and the risk of infringement of such rights, is entirely their own responsibility.
Participation by federal agency representative(s) or person(s) affiliated with industry is not to be interpreted as government or industry endorsement of this code or standard.
ASME accepts responsibility for only those interpretations of this document issued in accordance with the established ASME procedures and policies, which precludes the issuance of interpretations by individuals.
No part of this document may be reproduced in any form, in an electronic retrieval system or otherwise,
without the prior written permission of the publisher.
The American Society of Mechanical Engineers Two Park Avenue, New York, NY 10016-5990
Copyright © 2019 by
THE AMERICAN SOCIETY OF MECHANICAL ENGINEERS
All rights reserved Printed in U.S.A.
CONTENTS
Foreword . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xi
Statement of Policy on the Use of Certification Marks and Code Authorization in Advertising . . . . . . . . . . . xii
Committee Roster xiii
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xv
Summary of Changes xvi
Part 1 | General Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . | 1 |
1-100 | Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . | 1 |
1-200 | User’s Basic Requirements Specification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . | 1 |
1-300 | Fabricator’s Design Report . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . | 3 |
1-400 | Inspection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . | 3 |
1-500 | Fabricator’s Quality Control Program . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . | 8 |
Part 2 | Materials . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . | 13 |
2-100 | Scope . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . | 13 |
2-200 | Laminate Compositions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . | 13 |
2-300 | Materials . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . | 13 |
Subpart 2A | Requirements for Representative Flat Laminates . . . . . . . . . . . . . . . . . . . . . . . . . . | 14 |
2A-100 | Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . | 14 |
2A-200 | Laminate Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . | 14 |
2A-300 | Requirements for Physical and Mechanical Properties . . . . . . . . . . . . . . . . . . . . . . . . . . | 15 |
2A-400 | Test Methods . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . | 17 |
2A-500 | Records . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . | 17 |
2A-600 | Additional Standard Laminate Compositions for Subpart 2A . . . . . . . . . . . . . . . . . . . . . . | 17 |
Subpart 2B | Requirements for Laminates Developed Using the Lamination Analysis Method (Type X) | 18 |
2B-100 | Laminate Composition . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . | 18 |
2B-200 | Requirements for Physical and Mechanical Properties . . . . . . . . . . . . . . . . . . . . . . . . . . | 18 |
2B-300 | Test Methods . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . | 18 |
2B-400 | Records . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . | 18 |
Subpart 2C | Permissible Tolerances for Laminate Thickness Variation . . . . . . . . . . . . . . . . . . . . | 19 |
2C-100 | Tolerance for Average Spot Thickness . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . | 19 |
2C-200 | Tolerance for Average Thickness of a Major Part . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . | 19 |
2C-300 | Exceptions and Adjustments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . | 19 |
Part 3 | Design . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . | 20 |
3-100 | Scope . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . | 20 |
3-200 | General . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . | 20 |
3-300 | Definitions and Related Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . | 20 |
Subpart 3A | Design by Rules . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . | 21 |
3A-100 | Loadings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . | 21 |
3A-200 | Design for Total Internal Pressure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . | 23 |
3A-300 | Design for External Pressure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . | 26 |
3A-400 | Seismic, Wind, and Snow Loadings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . | 28 |
3A-500 | Large Diameter RTP Equipment Body Flanges . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . | 30 |
3A-600 | Vessels Supported by Shell Attachments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . | 30 |
3A-700 | Reinforcement of Circular Openings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . | 30 |
3A-800 | Secondary Bond Shear Stress . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . | 31 |
Subpart 3B | Design by Stress Analysis . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . | 31 |
3B-100 | Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . | 31 |
3B-200 | Design Acceptability . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . | 31 |
3B-300 | Loading . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . | 32 |
3B-400 | Design . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . | 33 |
3B-500 | Stress Criteria . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . | 33 |
3B-600 | External Pressure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . | 33 |
3B-700 | Attachments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . | 34 |
Part 4 | Fabrication . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . | 35 |
4-100 | Scope . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . | 35 |
4-200 | Large Diameter Body Flanges . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . | 35 |
4-300 | Shell Joints . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . | 35 |
4-400 | Flanged Nozzles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . | 36 |
4-500 | Manways . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . | 37 |
4-600 | Reinforcement of Cutouts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . | 37 |
4-700 | Tolerances . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . | 37 |
4-800 | Balsa Wood Cored Plates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . | 37 |
Part 5 | Overpressure Protection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . | 55 |
5-100 | Basis for Design . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . | 55 |
5-200 | Protection Against Overpressure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . | 55 |
5-300 | Type of Overpressure Protection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . | 55 |
5-400 | Location of Overpressure Protection Devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . | 55 |
5-500 | Installation Practices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . | 55 |
5-600 | Overpressure Device Set Pressure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . | 55 |
5-700 | Relief Device Sizing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . | 55 |
5-800 | Discharge Lines From Pressure Relief Devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . | 55 |
5-900 | Responsibility for Design and Selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . | 56 |
Part 6 | Inspection and Tests . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . | 57 |
6-100 | Scope . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . | 57 |
6-200 | Inspector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . | 57 |
6-300 | Inspection and Responsibility . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . | 57 |
6-400 | Conditions for Inspection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . | 58 |
6-500 | Equipment Design . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . | 58 |
6-600 | Materials . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . | 58 |
6-700 | Fabrication . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . | 58 |
6-800 | Fabricator’s Quality Assurance Program . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . | 58 |
6-900 | Final Inspection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . | 58 |
Part 7 | Shop Qualification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . | 66 |
7-100 | Scope . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . | 66 |
7-200 | General . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . | 66 |
7-300 | Fabricator’s Facilities and Equipment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . | 66 |
7-400 | Personnel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . | 66 |
7-500 | Quality Control Program, Document Handling, and Record System . . . . . . . . . . . . . . . . . | 66 |
7-600 | Demonstration of Capability (Demonstration Laminates) . . . . . . . . . . . . . . . . . . . . . . . . | 66 |
7-700 | Minimum Test Values From Demonstration Laminates . . . . . . . . . . . . . . . . . . . . . . . . . . | 68 |
7-800 | Demonstration Vessel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . | 69 |
7-900 | Identifying Demonstration Laminates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . | 69 |
7-1000 | Laboratory Test and Test Report Requirements for Demonstration Laminates . . . . . . . . . | 69 |
Part 8 | Certification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . | 72 |
8-100 | Scope . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . | 72 |
8-200 | General . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . | 72 |
8-300 |
|