New Reduced price! ASME B30.8-2020 View larger

ASME B30.8-2020

M00050507

New product

ASME B30.8-2020 Floating Cranes and Floating Derricks

standard by ASME International, 05/21/2021

Full Description

B30.8 applies to cranes and derricks mounted on barges or pontoons. Floating cranes are convertible for excavation service and other uses that are categorically not considered to be lifting service. The requirements of this volume are applicable only to floating cranes and floating derricks used for vertical lifting and lowering of freely suspended unguided loads.

More details

In stock

$34.76

-56%

$79.00

More info

Floating Cranes and Floating Derricks Safety Standard for Cableways, Cranes, Derricks, Hoists, Hooks, Jacks, and Slings


Floating Cranes and Floating Derricks


Safety Standard for Cableways, Cranes, Derricks, Hoists, Hooks, Jacks, and Slings



AN A MERICAN NA TIONAL S T AND ARD



ASME B30.8-2020

(Revision of ASME B30.8-2015)

ASME B30.8-2020

(Revision of ASME B30.8-2015)


Floating Cranes and

Floating Derricks


Safety Standard for Cableways, Cranes, Derricks, Hoists, Hooks, Jacks, and Slings


AN AMERICAN NATIONAL STANDARD



Two Park Avenue • New York, NY • 10016 USA

Date of Issuance: May 21, 2021


The next edition of this Standard is scheduled for publication in 2025. This Standard will become effective 1 year after the Date of Issuance.


ASME issues written replies to inquiries concerning interpretations of technical aspects of this Standard. Interpretations are published on the ASME website under the Committee Pages at https://cstools.asme.org/ as they are issued.


Errata to codes and standards may be posted on the ASME website under the Committee Pages to provide corrections to incorrectly published items, or to correct typographical or grammatical errors in codes and standards. Such errata shall be used on the date posted.


The Committee Pages can be found at https://cstools.asme.org/. There is an option available to automatically receive an e-mail notification when errata are posted to a particular code or standard. This option can be found on the appropriate Committee Page after selecting “Errata” in the “Publication Information” section.


ASME is the registered trademark of The American Society of Mechanical Engineers.


This code or standard was developed under procedures accredited as meeting the criteria for American National Standards. The Standards Committee that approved the code or standard was balanced to assure that individuals from competent and concerned interests have had an opportunity to participate. The proposed code or standard was made available for public review and comment that provides an opportunity for additional public input from industry, academia, regulatory agencies, and the public-at-large.

ASME does not “approve,” “rate,” or “endorse” any item, construction, proprietary device, or activity.

ASME does not take any position with respect to the validity of any patent rights asserted in connection with any items mentioned in this document, and does not undertake to insure anyone utilizing a standard against liability for infringement of any applicable letters patent, nor assume any such liability. Users of a code or standard are expressly advised that determination of the validity of any such patent rights, and the risk of infringement of such rights, is entirely their own responsibility.

Participation by federal agency representative(s) or person(s) affiliated with industry is not to be interpreted as government or industry endorsement of this code or standard.

ASME accepts responsibility for only those interpretations of this document issued in accordance with the established ASME procedures and policies, which precludes the issuance of interpretations by individuals.


No part of this document may be reproduced in any form, in an electronic retrieval system or otherwise,

without the prior written permission of the publisher.


The American Society of Mechanical Engineers Two Park Avenue, New York, NY 10016-5990


Copyright © 2021 by

THE AMERICAN SOCIETY OF MECHANICAL ENGINEERS

All rights reserved Printed in U.S.A.


CONTENTS



Foreword . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Committee Roster . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

B30 Standard Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Summary of Changes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

v vi viii xi

Chapter 8-0 Scope, Definitions, Personnel Competence, Translations, and References . . . . . . . .

1

Section 8-0.1 Scope of ASME B30.8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1

Section 8-0.2 Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1

Section 8-0.3 Personnel Competence . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

6

Section 8-0.4 Translations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

6

Section 8-0.5 References . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

6

Chapter 8-1 Construction and Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

8

Section 8-1.1 Load Ratings and Markings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

8

Section 8-1.2 Construction and Loading Conditions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

8

Section 8-1.3 General Requirements for Pontoons and Barges . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

9

Section 8-1.4 General Requirements for Cranes and Derricks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

10

Section 8-1.5 Vertical Clearance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

11

Section 8-1.6 Boom Hoist (Luffing Hoist) and Load Hoist Mechanisms . . . . . . . . . . . . . . . . . . . . . . .

11

Section 8-1.7 Swing Mechanism . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

12

Section 8-1.8 Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

12

Section 8-1.9 Ropes and Reeving Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

13

Section 8-1.10 Cabs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

15

Section 8-1.11 General Requirements for Booms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

15

Chapter 8-2 Inspection, Testing, and Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

16

Section 8-2.1 Inspection — General . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

16

Section 8-2.2 Testing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

17

Section 8-2.3 Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

18

Section 8-2.4 Rope Inspection, Replacement, and Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

19

Chapter 8-3 Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

21

Section 8-3.1 Qualifications and Responsibilities . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

21

Section 8-3.2 Operating Practices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

24

Section 8-3.3 Signals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

26

Section 8-3.4 Miscellaneous . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

26


Figures

8-0.1-1 Floating Crane . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2

8-0.1-2 Barge-Mounted Shearleg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2

8-0.1-3 Barge-Mounted Land Crane . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

3

8-0.1-4 Floating Stiffleg Derrick . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

3


iii


8-0.1-5

Floating A-Frame Derrick . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

3

8-0.2-1

Reach for Floating Cranes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

5

8-1.9.3-1

Dead-Ending Rope in a Wedge Socket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

14

8-2.4.1-1

Core Failure in 19 × 7 Rotation-Resistant Rope . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

20

8-3.3.2-1

Standard Hand Signals for Controlling Crane and Derrick Operations . . . . . . . . . . . . . .

28

8-3.4.3-1

Danger Zone for Cranes, Derricks, and Lifted Loads Operating Near Electrical Transmission Lines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .


31


Tables

8-3.4.3-1

Required Clearance for Normal Voltage in Operation Near High Voltage Power Lines and Operation in Transit With No Load and Boom or Mast Lowered . . . . . . . . . . . . . . .


31



iv


FOREWORD


This American National Standard, Safety Standard for Cableways, Cranes, Derricks, Hoists, Hooks, Jacks, and Slings, has been developed under the procedures accredited by the American National Standards Institute (ANSI). This Standard had its beginning in December 1916, when an eight-page “Code of Safety Standards for Cranes,” prepared by the American Society of Mechanical Engineers (ASME) Committee on the Protection of Industrial Workers, was presented at the annual meeting of the ASME.

Meetings and discussions regarding safety on cranes, derricks, and hoists were held from 1920 to 1925 involving the ASME Safety Code Correlating Committee, the Association of Iron and Steel Electrical Engineers, the American Museum of Safety, the American Engineering Standards Committee (AESC) [later changed to American Standards Association (ASA), then to the United States of America Standards Institute (USASI), and finally to ANSI], Department of Labor — State of New Jersey, Department of Labor and Industry — State of Pennsylvania, and the Locomotive Crane Manufacturers Association. On June 11, 1925, the AESC approved the ASME Safety Code Correlating Committee’s recommendation and authorized the project with the U.S. Department of the Navy, Bureau of Yards and Docks, and ASME as sponsors.

In March 1926, invitations were issued to 50 organizations to appoint representatives to a Sectional Committee. The call for organization of this Sectional Committee was sent out October 2, 1926, and the Committee was organized on November 4, 1926, with 57 members representing 29 national organizations.

Commencing June 1, 1927, and using the eight-page Code published by ASME in 1916 as a basis, the Sectional Committee developed the “Safety Code for Cranes, Derricks, and Hoists.” The early drafts of this safety code included requirements for jacks, but due to inputs and comments on those drafts, the Sectional Committee decided in 1938 to make the requirements for jacks a separate code. In January 1943, ASA B30.2-1943 was published addressing a multitude of equipment types, and in August 1943, ASA B30.1-1943 was published addressing only jacks. Both documents were reaffirmed in 1952 and widely accepted as safety standards.

Due to changes in design, advancement in techniques, and general interest of labor and industry in safety, the Sectional Committee, under the joint sponsorship of ASME and the Bureau of Yards and Docks (now the Naval Facilities Engineering Command), was reorganized on January 31, 1962, with 39 members representing 27 national organizations. The new Committee changed the format of ASA B30.2-1943 so that the multitude of equipment types it addressed could be published in separate volumes that could completely cover the construction, installation, inspection, testing, mainte- nance, and operation of each type of equipment that was included in the scope of ASA B30.2. This format change resulted in B30.3, B30.5, B30.6, B30.11, and B30.16 being initially published as “Revisions” of B30.2, with the remainder of the B30 volumes being published as totally new volumes. ASA changed its name to USASI in 1966 and to ANSI in 1969, which resulted in B30 volumes from 1943 to 1968 being designated as ASA B30, USAS B30, or ANSI B30, depending on their date of publication. In 1982, the Committee was reorganized as an Accredited Organization Committee operating under procedures developed by ASME and accredited by ANSI.

This Standard presents a coordinated set of rules that may serve as a guide to government and other regulatory bodies and municipal authorities responsible for the guarding and inspection of the equipment falling within its scope. The suggestions leading to accident prevention are given both as mandatory and advisory provisions; compliance with both types may be required by employers of their employees. In case of practical difficulties, new developments, or unne- cessary hardship, the administrative or regulatory authority may grant variances from the literal requirements or permit the use of other devices or methods, but only when it is clearly evident that an equivalent degree of protection is thereby secured. To secure uniform application and interpretation of this Standard, administrative or regulatory authorities are urged to consult the B30 Committee, in accordance with the format described in Section IX of the B30 Standard Intro- duction, before rendering decisions on disputed points.

Safety codes and standards are intended to enhance public safety. Revisions result from committee consideration of factors such as technological advances, new data, and changing environmental and industry needs. Revisions do not imply that previous editions were inadequate.

ASME B30.8 was first published in 1977; new editions were published in 1982, 1988, 1993, 1999, 2004, and 2010. The 2015 edition incorporated many global B30 changes, including the addition of sections on personnel competence, transla- tions, and responsibilities, along with other revisions. This 2020 edition contains updated references.

This edition of the ASME B30.8 Volume was approved by the B30 Committee and by ASME and was approved by ANSI and designated as an American National Standard on June 11, 2020.


v


ASME B30 COMMITTEE

Safety Standard for Cableways, Cranes, Derricks, Hoists, Hooks,

Jacks, and Slings


(The following is the roster of the Committee at the time of approval of this Standard.)


STANDARDS COMMITTEE OFFICERS

T. L. Blanton, Chair

E. D. Fidler, Vice Chair

K. Peterson, Secretary


STANDARDS COMMITTEE PERSONNEL

N. E. Andrew, AM/NS Calvert

B. B. Bacon, Tennessee Valley Authority

T. L. Blanton, NACB Group, Inc.

P. A. Boeckman, The Crosby Group, Inc.

P. W. Boyd, The Boeing Co.

J. Burkey, Columbus McKinnon Corp.

B. D. Closson, Craft Forensic Service

J. A. Danielson, The Boeing Co.

D. R. Decker, Becket, LLC

L. D. Demark, Sr., Equipment Training Solutions, LLC

D. W. Eckstine, Eckstine and Associates

R. J. Edwards, NBIS Claims and Risk Management, Inc.

E. D. Fidler, Grove U.S., LLC

J. A. Gilbert, Associated Wire Rope Fabricators

G. B. Hetherston, Hetherston Consulting, LLC

M. M. Jaxtheimer, Navy Crane Center

P. R. Juhren, Morrow Equipment Co., LLC

R. M. Kohner, Landmark Engineering Services

A. J. Lusi, Jr., Lumark Consulting, LLP

  1. D. Means, Means Engineering and Consulting

  2. W. Mills, Liberty Mutual Insurance

W. E. Osborn, Ingersoll Rand

R. M. Parnell, Industrial Training International — Field Service

  1. T. Perkins, All Material Handling

  2. Peterson, The American Society of Mechanical Engineers

B. A. Pickett, Systems Engineering and Forensic Services

J. A. Pilgrim, Manitowoc Cranes

S. K. Rammelsberg, McDermott

K. Reynolds, Shell Exploration and Production

J. E. Richardson, U.S. Department of the Navy

D. W. Ritchie, Dave Ritchie Consultant, LLC

J. W. Rowland III, Consultant

A. R. Ruud, Atkinson Construction

L. K. Shapiro, Howard I. Shapiro and Associates

D. W. Smith, STI Group

W. J. Smith, Jr., NationsBuilders Insurance Services

R. S. Stemp, Lampson International, LLC

R. G. Strain, Advanced Crane Technologies, LLC

J. Sturm, Sturm Corp.

D. P. Sullivan, International Union of Operating Engineers Local 542 Joint Apprenticeship and Training Committee

P. D. Sweeney, Riverside Engineering, LLC

E. P. Vliet, Consultant

J. D. Wiethorn, Haag Engineering Co.

  1. C. Wild, CJ Drilling, Inc.

  2. D. Wood, Terex Corp.

R. J. Bolen, Alternate, Consultant

D. Boyle, Alternate, The Crosby Group

B. M. Casey, Alternate, Electric Boat

W. C. Dickinson, Jr., Alternate, Crane Industry Services, LLC

J. Dudley, Alternate, The Walsh Group

D. Duerr Alternate, 2DM Associates, Inc.

M. Eckstine, Alternate, Safelift, LLC

S. R. Fletcher, Alternate, Cowles, Murphy, Glover, and Associates

M. Gardiner, Alternate, Haag Engineering Co.

J. B. Greenwood, Alternate, Navy Crane Center

D. A. Henninger, Alternate, Bridon Bekaert, The Ropes Group

D. F. Jordan, Alternate, American International Crane Bureau

K. Kennedy, Alternate, Navy Crane Center

D. P. Lavoie, Alternate, Liberty Mutual Insurance

J. Lindsay, Alternate, Link-Belt Construction Equipment

J. Mihlbauer, Jr., Alternate, All Ship and Cargo Surveys, Ltd.

G. D. Miller, Alternate, Manitowoc Cranes

D. A. Moore, Alternate, Unified Engineering

L. S. Olver, Alternate, Kolo Holdings, Inc.

  1. M. Randall, Alternate, McDermott

  2. Rask, Alternate, NationsBuilders Insurance Services, Inc.

C. L. Richardson, Alternate, Lone Star Rigging, LP

M. Riggs, Alternate, Rigging Institute, LLC

J. R. Schober, Alternate, American Bridge Co.

J. Schoppert, Alternate, NBIS Claims and Risk Management

T. Sicklesteel, Alternate, Leavitt Cranes, USA

C. H. Smith, Alternate, Morrow Equipment Co., LLC

J. A. Stewart, Alternate, General Service Administration

J. J. Van Egeren, Alternate, Manitowoc Cranes

C. Warren, Alternate, Webber, LLC

M. P. Zerba, Alternate, Lampson International, LLC

J. W. Downs, Jr., Honorary Member, Downs Crane and Hoist Co.

J. L. Franks, Honorary Member, Consultant

C. W. Ireland, Honorary Member, Consultant

J. M. Klibert, Honorary Member, Lift-All Co., Inc.

R. W. Parry, Honorary Member, Parry Parry and Glen

J. C. Ryan, Honorary Member, Boh Bros. Construction Co.

D. N. Wolf, Honorary Member, Consultant


vi


B30.8 SUBCOMMITTEE PERSONNEL

A. R Ruud, Chair, Atkinson Construction

J. Barlow, Weeks Marine, Inc.

R. H. Bolton II, Cianbro Corp.

B. D. Closson, Craft Forensic Service

A. J. Egging, IPS Worldwide

T. L. Hinton, Naval Station Norfolk

G. Lee, Marine Design Center

J. Mihlbauer, Jr., All Ship and Cargo Surveys, Ltd.

J. E. Richardson, U.S. Department of the Navy

J. R. Schober, American Bridge Co.

D. Sidelinger, Cianbro Corp.

R. L. Signorino, The Blueoceana Co., Inc.

M. Supkis, Seatrax

J. J. Van Egeren, Manitowoc Cranes


B30 INTEREST REVIEW GROUP

O. Akinboboye, Ropetech Engineering Services

J. D. Cannon, U.S. Army Corps of Engineers

B. Dobbs, Lifting Equipment Engineers Association

M. J. Eggenberger, Berry Contracting, Inc.

J. B. Greenwood, Navy Crane Center

N. C. Hargreaves, Hargreaves Consulting, LLC

H. A. Hashem, Saudi Aramco

J. Hui, Si Pai Lou, School of Civil Engineering

A. C. Mattoli, Prowinch, LLC

J. Mellott-Green, All Canadian Training Institute, Inc.

J. Mihlbauer, Jr., All Ship and Cargo Surveys, Ltd.

L. S. Olver, Kolo Holdings, Inc.

G. L. Owens, Consultant

A. Payne, Bureau of Safety and Environmental Enforcement

K. Reynolds, Shell Exploration and Production Co.

A. G. Rocha, Industrial Training International

L. Shapiro, Howard I. Shapiro and Associates

C.-C. Tsaur, Institute of Occupational Safety and Health


B30 REGULATORY AUTHORITY COUNCIL

C. N. Stribling, Jr., Chair, Kentucky Labor Cabinet

K. Peterson, Secretary, The American Society of Mechanical Engi- neers

R. D. Jackson, U.S. Department of Labor

D. E. Latham, State of Maryland Department of Labor, Licensing and Regulation

M. J. Nelmida, State of California, Occupational Safety and Health Standards Board

C. Shelhamer, New York City Department of Buildings

T. Taylor, Minnesota Department of Labor and Industry

G. M. Thomas, South Carolina Department of Labor, Licensing and Regulation

A. O. Omran, Alternate, New York City Department of Buildings

  1. Reynolds, Alternate, Maryland Occupational Safety and Health (MOSH)



    vii



    ð20Þ

    B30 STANDARD INTRODUCTION


    SECTION I: SCOPE


    The ASME B30 Standard contains provisions that apply to the construction, installation, operation, inspection, testing, maintenance, and use of cranes and other lifting and material-movement-related equipment. For the convenience of the reader, the Standard has been divided into separate volumes. Each volume has been written under the direction of the ASME B30 Standards Committee and has successfully completed a consensus approval process under the general auspices of the Amer- ican National Standards Institute (ANSI).

    As of the date of issuance of this Volume, the B30 Stan- dard comprises the following volumes:

    B30.1 Jacks, Industrial Rollers, Air Casters, and Hydraulic Gantries

    B30.2 Overhead and Gantry Cranes (Top Running Bridge, Single or Multiple Girder, Top Running Trolley Hoist)

    B30.3 Tower Cranes

    B30.4 Portal and Pedestal Cranes B30.5 Mobile and Locomotive Cranes B30.6 Derricks

    B30.7 Winches

    B30.8 Floating Cranes and Floating Derricks B30.9 Slings

    B30.10 Hooks

    B30.11 Monorails and Underhung Cranes (withdrawn 2018 — requirements found in latest revision of B30.17)

    B30.12 Handling Loads Suspended From Rotorcraft B30.13 Storage/Retrieval (S/R) Machines and

    Associated Equipment

    B30.14 Side Boom Tractors

    B30.15 Mobile Hydraulic Cranes (withdrawn 1982 — requirements found in latest revision of B30.5)

    B30.16 Overhead Underhung and Stationary Hoists B30.17 Cranes and Monorails (With Underhung Trolley

    or Bridge)

    B30.18 Stacker Cranes (Top or Under Running Bridge, Multiple Girder With Top or Under Running Trolley Hoist)

    B30.19 Cableways

    B30.20 Below-the-Hook Lifting Devices

    B30.21 Lever Hoists

    B30.22 Articulating Boom Cranes B30.23 Personnel Lifting Systems B30.24 Container Cranes

    B30.25 Scrap and Material Handlers B30.26 Rigging Hardware

    B30.27 Material Placement Systems B30.28 Balance Lifting Units

    B30.29 Self-Erecting Tower Cranes B30.30 Ropes

    B30.31 Self-Propelled, Towed, or Remote-Controlled Hydraulic Platform Transporters1

    B30.32 Unmanned Aircraft Systems (UAS) Used in Inspection, Testing, Maintenance, and Lifting Operations1


    SECTION II: SCOPE EXCLUSIONS


    Any exclusion of, or limitations applicable to, the equip- ment, requirements, recommendations, or operations contained in this Standard are established in the affected volume’s scope.


    SECTION III: PURPOSE


    The B30 Standard is intended to

    1. prevent or minimize injury to workers, and other- wise provide for the protection of life, limb, and property by prescribing safety requirements

    2. provide direction to manufacturers, owners, employers, users, and others concerned with, or respon- sible for, its application

    3. guide governments and other regulatory bodies in the development, promulgation, and enforcement of appropriate safety directives


SECTION IV: USE BY REGULATORY AGENCIES


These volumes may be adopted in whole or in part for governmental or regulatory use. If adopted for govern- mental use, the references to other national codes and standards in the specific volumes may be changed to refer to the corresponding regulations of the govern- mental authorities.


1 This volume is currently in the development process.


viii