> >ASME A112.19.2-2018/CSA B45.1-18
New Reduced price! ASME A112.19.2-2018/CSA B45.1-18 View larger

ASME A112.19.2-2018/CSA B45.1-18

M00052016

New product

ASME A112.19.2-2018/CSA B45.1-18 Ceramic Plumbing Fixtures, Includes Errata (2018)

standard by ASME International, 07/01/2018

Full Description

This Standard covers vitreous and non-vitreous china plumbing fixtures and specifies requirements for materials, construction, performance, testing, and markings. This Standard's performance requirements and test procedures apply to all types of water closets and urinals that discharge into gravity drainage systems in permanent buildings and structures, independent of occupancy.

This Standard covers the following plumbing fixtures:

A) bathtubs;
B) bidets;
C) drinking fountains;
D) fixtures for institutional applications;
E) lavatories;
F) shower bases;
G) sinks:
H) urinals; and
I) water closets.
i) bar sinks;
ii) clinic sinks;
iii) kitchen sinks;
iv) laboratory sinks;
v) laundry sinks;
vi) service sinks; and
vii) utility sinks;

This Standard is "harmonized" - developed in response to industry requests for uniform standards that would be acceptable in both the United States and Canada. Notably, A112.19.2 has served as a "seed document" for similar standards in Mexico, Brazil, China, the Philippines and elsewhere.

A112.19.1 / A112.19.2 /A112.19.3 are to be used in conjunction with components described in other volumes of the ASME A112 series. Careful application of these A112 standards will help users to comply with pertinent regulations, while achieving the operational and safety benefits to be gained from the many industry best-practices detailed within these volumes.Intended for manufacturers of plumbing materials and equipment to enhance water conservation and comply with jurisdictional regulation, plus governmental and other regulatory bodies.

Product Details

Edition: 3rd Published: 07/01/2018 ISBN(s): 9780791872468 ANSI: ANSI Approved Number of Pages: 93 File Size: 1 file , 2 MB Redline File Size: 2 files , 7.7 MB

More details

In stock

$48.40

-56%

$110.00

More info

5xxt12cp

ASME A112.19.2-2018/CSA B45.1-18


Ceramic plumbing fixtures


REVISED OCTOBER 2018


Legal Notice for Harmonized Standard

Jointly Developed by ASME and CSA Group


Intellectual property rights and ownership

As between American Society of Mechanical Engineers (“ASME”) and Canadian Standards Association (Operating as “CSA Group”) (collectively “ASME and CSA Group”) and the users of this document (whether it be in printed or electronic form), ASME and CSA Group are the joint owners of all works contained herein that are protected by copyright, all trade-marks (except as otherwise noted to the contrary), and all inventions and trade secrets that may be contained in this document, whether or not such inventions and trade secrets are protected by patents and applications for patents. The unauthorized use, modification, copying, or disclosure of this document may violate laws that protect the intellectual property of ASME and CSA Group and may give rise to a right in ASME and CSA Group to seek legal redress for such use, modification, copying, or disclosure. ASME and CSA Group reserve all intellectual property rights in this document.

Disclaimer and exclusion of liability

This document is provided without any representations, warranties, or conditions of any kind, express or implied, including, without limitation, implied warranties or conditions concerning this document’s fitness for a particular purpose or use, its merchantability, or its non-infringement of any third party’s intellectual property rights. ASME and CSA Group do not warrant the accuracy, completeness, or currency of any of the information published in this document. ASME and CSA Group make no representations or warranties regarding this document’s compliance with any applicable statute, rule, or regulation.

IN NO EVENT SHALL ASME AND CSA GROUP, THEIR RESPECTIVE VOLUNTEERS, MEMBERS, SUBSIDIARIES, OR AFFILIATED COMPANIES, OR THEIR EMPLOYEES, DIRECTORS, OR OFFICERS, BE LIABLE FOR ANY DIRECT, INDIRECT, OR INCIDENTAL DAMAGES, INJURY, LOSS, COSTS, OR EXPENSES, HOWSOEVER CAUSED, INCLUDING BUT NOT LIMITED TO SPECIAL OR CONSEQUENTIAL DAMAGES, LOST REVENUE, BUSINESS INTERRUPTION, LOST OR DAMAGED DATA, OR ANY OTHER COMMERCIAL OR ECONOMIC LOSS, WHETHER BASED IN CONTRACT, TORT (INCLUDING NEGLIGENCE), OR ANY OTHER THEORY OF LIABILITY, ARISING OUT OF OR RESULTING FROM ACCESS TO OR POSSESSION OR USE OF THIS DOCUMENT, EVEN IF ASME OR CSA GROUP HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES, INJURY, LOSS, COSTS, OR EXPENSES.

In publishing and making this document available, ASME and CSA Group are not undertaking to render professional or other services for or on behalf of any person or entity or to perform any duty owed by any person or entity to another person or entity. The information in this document is directed to those who have the appropriate degree of experience to use and apply its contents, and ASME and CSA Group accept no responsibility whatsoever arising in any way from any and all use of or reliance on the information contained in this document.

ASME and CSA Group have no power, nor do they undertake, to enforce compliance with the contents of the standards or other documents they jointly publish.

Authorized use of this document

This document is being provided by ASME and CSA Group for informational and non-commercial use only. The user of this document is authorized to do only the following:

If this document is in electronic form:

  • load this document onto a computer for the sole purpose of reviewing it;

  • search and browse this document; and

  • print this document if it is in PDF format.

Limited copies of this document in print or paper form may be distributed only to persons who are authorized by ASME and CSA Group to have such copies, and only if this Legal Notice appears on each such copy.

In addition, users may not and may not permit others to

  • alter this document in any way or remove this Legal Notice from the attached standard;

  • sell this document without authorization from ASME and CSA Group ; or

  • make an electronic copy of this document.

If you do not agree with any of the terms and conditions contained in this Legal Notice, you may not load or use this document or make any copies of the contents hereof, and if you do make such copies, you are required to destroy them immediately. Use of this document constitutes your acceptance of the terms and conditions of this Legal Notice.



ASME A112.19.2-2018/CSA B45.1-18, Ceramic plumbing fixtures


Errata — October 2018

Revision symbol (in margin)

Preface

Clause 7.9.2.2.3

Figure 3

∆


ASME A112.19.2-2018/CSA B45.1-18

July 2018


Title: Ceramic plumbing fixtures

To register for e-mail notification about any updates to this publication

  • go to store.csagroup.org

  • click on CSA Update Service

The List ID that you will need to register for updates to this publication is 2425956.

If you require assistance, please e-mail techsupport@csagroup.org or call 416-747-2233.

Visit CSA Group’s policy on privacy at www.csagroup.org/legal to find out how we protect your personal information.

ASME/CSA Standard


ASME A112.19.2-2018/CSA B45.1-18

Ceramic plumbing fixtures






®A trademark of the Canadian Standards Association and CSA America Inc., operating as “CSA Group”


Published in July 2018 by CSA Group

A not-for-profit private sector organization

178 Rexdale Boulevard, Toronto, Ontario, Canada M9W 1R3 1-800-463-6727 • 416-747-4044

Visit the CSA Group Online Store at shop.csa.ca


The American Society of Mechanical Engineers (ASME) Three Park Avenue

New York, NY 10016-5990, USA 1-800-843-2763

Visit the ASME Online Store at www.asme.org

Commitment for Amendments

This Standard is issued jointly by the American Society of Mechanical Engineers (ASME) and the Canadian Standards Association (Operating as “CSA Group”). Amendments to this Standard will be made only after processing according to the Standards writing procedures of both ASME and CSA Group.


The American Society of Mechanical Engineers (ASME)

Three Park Avenue

New York, NY 10016-5990 USA

1-800-843-2763

Visit the ASME Online Store at www.asme.org

Published in June 2018 by CSA Group

A not-for-profit private sector organization 178 Rexdale Boulevard

Toronto, Ontario, Canada M9W 1R3

1-800-463-6727 or 416-747-4044

Visit the CSA Group Online Store at shop.csa.ca

Copyright © 2018 by The American Society of Mechanical Engineers (ASME)

ISBN 978-1-4883-1274-8

© 2018 Canadian Standards Association

This Standard is available for public review on a continuous basis. This provides an opportunity for additional public input from industry, academia, regulatory agencies, and the public at large.

All rights reserved. No part of this publication may be reproduced in any form whatsoever without the prior permission of the publisher.

Contents

ASME A112 Standards Committee on Plumbing Materials and Equipment 6


ASME A112.19.2 Project Team on Vitreous China Plumbing Fixtures 10


CSA Technical Committee on Plumbing Fixtures 12


CSA/ASME Harmonization Task Group on Plumbing Fixtures 17


Preface 19


  1. Scope 21


  2. Reference publications 22


  3. Definitions and abbreviations 23

    1. Definitions 23

    2. Abbreviations 27


  4. General requirements 28

    1. Dimensions and tolerances 28

      1. Thickness 28

      2. Tolerances 28

    2. Glazing 28

    3. Waste fitting openings, drainage, and overflows 29

      1. Openings and drainage 29

      2. Overflows 29

    4. Off-the-floor plumbing fixture supports 29

    5. Non-vitreous china plumbing fixtures 30

      1. Glazing 30

      2. Integral traps 30

    6. Additional requirements for water closets 30

      1. Outlet dimensions 30

      2. Non-standard outlets 30

      3. Bolt hole spacing 30

      4. Roughing-in details 30

      5. Seat-mounting holes 30

      6. Rim profiles 30

      7. Water surface dimensions 30

      8. Trap diameter 30

      9. Spuds 31

      10. Rim heights 31

    7. Additional requirements for urinals 31

      1. Integral trap diameter 31

      2. Dimensions 31

      3. Spuds 31

      4. Materials and construction 31

      5. Non-water-consuming urinals 31

    8. Additional requirements for lavatories, sinks, and bidets 31

      1. Openings and mounting surfaces for supply fittings 31

      2. Wall-mounted commercial lavatories and sinks 32

      3. Spuds for clinic sinks 32

    9. Additional requirements for bathtubs and shower bases 32

      1. Minimum dimensions for bathtubs 32

      2. Slope to the waste outlet 32

      3. Flanges 32

    10. Additional requirements for drinking fountains 33

    11. Accessible design fixtures 33


  5. Flushing devices used with fixtures 33

    1. General 33

    2. Gravity flush tanks 33

      1. General 33

      2. Fill valve opening diameter and location 33

      3. Critical level 33

      4. Low-profile gravity tanks 34

      5. Water closet fill valve 34

      6. Water closet tank capacity 34

    3. Pressurized flushing devices 34

      1. General 34

      2. Low-profile tanks with pressurized flushing devices 34

    4. Plastic water closet tanks 34

    5. Electrical components of electro-hydraulic water closets 34

      1. Pump motor and impeller 34

      2. Jet hose 34

      3. Electrical supply cords 35

      4. Wiring harnesses and electrical controls 35

    6. Dual-flush water closets 35


  6. Tests — Materials, finishes, structural integrity, and seals 35

    1. Water absorption test 35

      1. Test specimen 35

      2. Specimen preparation 35

      3. Procedure 35

      4. Report 35

      5. Performance 36

    2. Crazing test 36

      1. Test specimen 36

      2. Procedure 36

      3. Performance 36

    3. Surface examination 36

      1. Procedure 36

      2. Evaluation 36

      3. Performance 37

      4. Other fixtures 37

    4. Warpage test 37

      1. Procedure 37

      2. Performance 37

    5. Field-installed tiling-flange seal test 37

      1. Procedure 37

      2. Performance 38

    6. Overflow test (lavatories, sinks, and bidets) 38

      1. Procedure 38

      2. Performance 38

    7. Structural integrity tests for all wall-mounted plumbing fixtures and thin-wall lavatories 38

      1. All wall-mounted fixtures and thin-wall lavatories 38

      2. Wall-mounted water closets 39

      3. Wall-mounted and thin-wall lavatories 39

      4. Wall-mounted urinals 39

    8. Structural integrity test for bathtubs, shower bases, and non-vitreous service sinks 39

      1. Apparatus 39

      2. Procedure 40

      3. Performance 40

    9. Joint seal test 40

    10. Auger test 40

      1. Procedure 40

      2. Performance 40

    11. Condensation-free (insulated) tank test 40

      1. Procedure 40

      2. Performance 41


  7. Water closet tests 41

    1. General 41

      1. All tests 41

      2. Gravity flush tank water closets 41

      3. Flushometer tank, electro-hydraulic, or other pressurized flushing device water closets 42

      4. Flushometer valve water closets 42

      5. Procedures for standardizing the water supply system 42

      6. Test medium 43

      7. Reports 43

    2. Trap seal depth determination test 43

      1. Apparatus 43

      2. Procedure 43

      3. Report 43

      4. Performance 43

    3. Water consumption test 43

      1. General 43

      2. Apparatus 44

      3. Procedure 44

      4. Report 44

      5. Performance 44

    4. Trap seal restoration test 44

      1. Apparatus 44

      2. Procedure 44

      3. Report 45

      4. Performance 45

    5. Granule and ball test 45

      1. Test media 45

      2. Procedure 45

      3. Report 45

      4. Performance 46

    6. Surface wash test 46

      1. Test medium 46

      2. Procedure 46

      3. Report 46

      4. Performance 46

    7. Drain line transport characterization test 46

      1. Test medium 46

      2. Apparatus 46

      3. Procedure 47

      4. Report 47

      5. Performance 47

    8. Overflow test for gravity flush tanks 48

      1. Apparatus 48

      2. Procedure 48

      3. Report 48

      4. Performance 48

    9. Waste extraction test 48

      1. Apparatus 48

      2. Test media 48

      3. Procedure 50

      4. Performance and report 50

      5. Performance 50

    10. Consistent water level test 51

      1. Procedure 51

      2. Performance 51