Legal Notice for Harmonized Standard

Jointly Developed by ASME and CSA Group

Intellectual property rights and ownership

As between American Society of Mechanical Engineers (’’ASME’’) and Canadian Standards Association (Operating as “CSA Group‘‘) (collectively ‘‘ASME and CSA Group’’) and the users of this document (whether it be in printed or electronic form), ASME and CSA Group are the joint owners of all works contained herein that are protected by copyright, all trade-marks (except as otherwise noted to the contrary), and all inventions and trade secrets that may be contained in this document, whether or not such inventions and trade secrets are protected by patents and applications for patents. The unauthorized use, modification, copying, or disclosure of this document may violate laws that protect the intellectual property of ASME and CSA Group and may give rise to a right in ASME and CSA Group to seek legal redress for such use, modification, copying, or disclosure. ASME and CSA Group reserve all intellectual property rights in this document.

Disclaimer and exclusion of liability

This document is provided without any representations, warranties, or conditions of any kind, express or implied, including, without limitation, implied warranties or conditions concerning this document’s fitness for a particular purpose or use, its merchantability, or its non-infringement of any third party’s intellectual property rights. ASME and CSA Group do not warrant the accuracy, completeness, or currency of any of the information published in this document. ASME and CSA Group make no representations or warranties regarding this document’s compliance with any applicable statute, rule, or regulation.

IN NO EVENT SHALL ASME AND CSA GROUP, THEIR RESPECTIVE VOLUNTEERS, MEMBERS, SUBSIDIARIES, OR AFFILIATED COMPANIES, OR THEIR EMPLOYEES, DIRECTORS, OR OFFICERS, BE LIABLE FOR ANY DIRECT, INDIRECT, OR INCIDENTAL DAMAGES, INJURY, LOSS, COSTS, OR EXPENSES, HOWSOEVER CAUSED, INCLUDING BUT NOT LIMITED TO SPECIAL OR CONSEQUENTIAL DAMAGES, LOST REVENUE, BUSINESS INTERRUPTION, LOST OR DAMAGED DATA, OR ANY OTHER COMMERCIAL OR ECONOMIC LOSS, WHETHER BASED IN CONTRACT, TORT (INCLUDING NEGLIGENCE), OR ANY OTHER THEORY OF LIABILITY, ARISING OUT OF OR RESULTING FROM ACCESS TO OR POSSESSION OR USE OF THIS DOCUMENT, EVEN IF ASME OR CSA GROUP HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES, INJURY, LOSS, COSTS, OR EXPENSES.

In publishing and making this document available, ASME and CSA Group are not undertaking to render professional or other services for or on behalf of any person or entity or to perform any duty owed by any person or entity to another person or entity. The information in this document is directed to those who have the appropriate degree of experience to use and apply its contents, and ASME and CSA Group accept no responsibility whatsoever arising in any way from any and all use of or reliance on the information contained in this document.

ASME and CSA Group have no power, nor do they undertake, to enforce compliance with the contents of the standards or other documents they jointly publish.

Authorized use of this document

This document is being provided by ASME and CSA Group for informational and non-commercial use only. The user of this document is authorized to do only the following:

If this document is in electronic form:

• load this document onto a computer for the sole purpose of reviewing it;

• search and browse this document; and

• print this document if it is in PDF format.

Limited copies of this document in print or paper form may be distributed only to persons who are authorized by ASME and CSA Group to have such copies, and only if this Legal Notice appears on each such copy.

In addition, users may not and may not permit others to

• alter this document in any way or remove this Legal Notice from the attached standard;

• sell this document without authorization from ASME and CSA Group ; or

• make an electronic copy of this document.

If you do not agree with any of the terms and conditions contained in this Legal Notice, you may not load or use this document or make any copies of the contents hereof, and if you do make such copies, you are required to destroy them immediately. Use of this document constitutes your acceptance of the terms and conditions of this Legal Notice.

Errata — August 2017

Revision symbol (in margin)

Figure 3

∆

Errata — May 2017

Revision symbol (in margin)

Clause 1.2

Figure 7

∆

March 2017

© The American Society of Mechanical Engineers

© 2017 CSA Group

2

ASME A112.19.3-2017/CSA B45.4-17

Stainless steel plumbing fixtures

W.M. Smith

American Society of Plumbing Engineers, Montgomery, Alabama, USA

Chair

S.M. Rawalpindiwala

Kohler Co. Plumbing Division, Kohler, Wisconsin, USA

Vice-Chair

C. McLeod

Kohler,

Dana Point, California, USA

Alternate to: S. Rawalpindiwala

Alternate

R.K. Adler

City of San Jose,

San Jose, California, USA

J.A. Ballanco

JB Engineering & Code Consulting, PC, Munster, Indiana, USA

J.E. Bertrand

Moen Incorporated,

North Olmsted, Ohio, USA

A. Bonlender

Bradley Corporation,

Menomonee Falls, Wisconsin, USA

R. Burnham

Zurn Industries LLC, Erie, Pennsylvania, USA

M. Campos

ICC Evaluation Service, LLC, Brea, California, USA

S.L. Cavanaugh

Cavanaugh Consulting, Santa Fe, New Mexico, USA

Contributing Member

W.E. Chapin

Professional Code Consulting, LLC, Cullman, Alabama, USA

P.V. DeMarco

IAPMO,

Dayton, New Jersey, USA

N.E. Dickey

CSA Group,

Toronto, Ontario, Canada

March 2017

© The American Society of Mechanical Engineers

© 2017 CSA Group

3

ASME A112.19.3-2017/CSA B45.4-17

Stainless steel plumbing fixtures

F. DiFolco

CSA Group,

Toronto, Ontario, Canada

Alternate to: N.E. Dickey

Alternate

G.S. Duren

Code Compliance, Inc.,

South Pasadena, Florida, USA

R. Emmerson

Consultant,

Mundelein, Illinois, USA

R.L. George

Plumb-Tech Design and Consulting Services L.L.C, Newport, Michigan, USA

G.W. Harrison

Wayne Harrison Consulting, Edmond, Oklahoma, USA

L. Himmelblau

Chicago Faucet,

Des Plaines, Illinois, USA

C.L. Jahrling

ASSE International, Chicago, Illinois, USA

Contributing Member

J.M. Koeller

Koeller and Co.,

Yorba Linda, California, USA

N.M. Kummerlen

Consultant, Lorain, Ohio, USA

Contributing Member

C.J. Lagan

American Standard, Piscataway, New Jersey, USA

M. Malatesta

American Standard, Piscataway, New Jersey, USA Alternate to: C J Lagan

Alternate

J.W. Lauer

Sloan Valve Company, Anaheim, California, USA

D. Glieberman

Sloan Valve Company,

Huntington Beach, California, USA

Alternate to: J.W. Lauer

Alternate

W.H. LeVan

Cast Iron Soil Pipe Institute, Panama City Beach, Florida, USA

March 2017

© The American Society of Mechanical Engineers

© 2017 CSA Group

4