> >ASME A112.19.1-2018/CSA B45.2-18
New Reduced price! ASME A112.19.1-2018/CSA B45.2-18 View larger

ASME A112.19.1-2018/CSA B45.2-18

M00052025

New product

ASME A112.19.1-2018/CSA B45.2-18 Enamelled Cast Iron and Enamelled Steel Plumbing Fixtures

standard by ASME International, 07/01/2018

Full Description

This Standard covers enamelled cast iron and enamelled steel plumbing fixtures, and specifies requirements for materials, construction, performance, testing, and markings.

This Standard covers the following plumbing fixtures:

a) bathtubs;
b) drinking fountains and water coolers;
c) lavatories;
d) shower bases; and
e) sinks:
i) bar sinks;
ii) clinic sinks;
iii) kitchen sinks;
iv) laboratory sinks;
v) laundry sinks;
vi) service sinks; and
vii) utility sinks.

This Standard is "harmonized" - developed in response to industry requests for uniform standards that would be acceptable in both the United States and Canada.

A112.19.1 / A112.19.2 /A112.19.3 are to be used in conjunction with components described in other volumes of the ASME A112 series. Careful application of these A112 standards will help users to comply with pertinent regulations, while achieving the operational and safety benefits to be gained from the many industry best-practices detailed within these volumes.

Intended for manufacturers of plumbing materials and equipment to enhance water conservation and comply with jurisdictional regulation, plus governmental and other regulatory bodies.

Product Details

Published: 07/01/2018 ISBN(s): 9780791872499 ANSI: ANSI Approved Number of Pages: 44 File Size: 1 file , 1.6 MB Redline File Size: 2 files , 6 MB

More details

In stock

$35.20

-56%

$80.00

More info

lvzwzzok

ASME A112.19.1-2018/CSA B45.2-18


Enamelled cast iron and enamelled steel plumbing fixtures


Legal Notice for Harmonized Standard

Jointly Developed by ASME and CSA Group


Intellectual property rights and ownership

As between American Society of Mechanical Engineers (“ASME”) and Canadian Standards Association (Operating as “CSA Group”) (collectively “ASME and CSA Group”) and the users of this document (whether it be in printed or electronic form), ASME and CSA Group are the joint owners of all works contained herein that are protected by copyright, all trade-marks (except as otherwise noted to the contrary), and all inventions and trade secrets that may be contained in this document, whether or not such inventions and trade secrets are protected by patents and applications for patents. The unauthorized use, modification, copying, or disclosure of this document may violate laws that protect the intellectual property of ASME and CSA Group and may give rise to a right in ASME and CSA Group to seek legal redress for such use, modification, copying, or disclosure. ASME and CSA Group reserve all intellectual property rights in this document.

Disclaimer and exclusion of liability

This document is provided without any representations, warranties, or conditions of any kind, express or implied, including, without limitation, implied warranties or conditions concerning this document’s fitness for a particular purpose or use, its merchantability, or its non-infringement of any third party’s intellectual property rights. ASME and CSA Group do not warrant the accuracy, completeness, or currency of any of the information published in this document. ASME and CSA Group make no representations or warranties regarding this document’s compliance with any applicable statute, rule, or regulation.

IN NO EVENT SHALL ASME AND CSA GROUP, THEIR RESPECTIVE VOLUNTEERS, MEMBERS, SUBSIDIARIES, OR AFFILIATED COMPANIES, OR THEIR EMPLOYEES, DIRECTORS, OR OFFICERS, BE LIABLE FOR ANY DIRECT, INDIRECT, OR INCIDENTAL DAMAGES, INJURY, LOSS, COSTS, OR EXPENSES, HOWSOEVER CAUSED, INCLUDING BUT NOT LIMITED TO SPECIAL OR CONSEQUENTIAL DAMAGES, LOST REVENUE, BUSINESS INTERRUPTION, LOST OR DAMAGED DATA, OR ANY OTHER COMMERCIAL OR ECONOMIC LOSS, WHETHER BASED IN CONTRACT, TORT (INCLUDING NEGLIGENCE), OR ANY OTHER THEORY OF LIABILITY, ARISING OUT OF OR RESULTING FROM ACCESS TO OR POSSESSION OR USE OF THIS DOCUMENT, EVEN IF ASME OR CSA GROUP HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES, INJURY, LOSS, COSTS, OR EXPENSES.

In publishing and making this document available, ASME and CSA Group are not undertaking to render professional or other services for or on behalf of any person or entity or to perform any duty owed by any person or entity to another person or entity. The information in this document is directed to those who have the appropriate degree of experience to use and apply its contents, and ASME and CSA Group accept no responsibility whatsoever arising in any way from any and all use of or reliance on the information contained in this document.

ASME and CSA Group have no power, nor do they undertake, to enforce compliance with the contents of the standards or other documents they jointly publish.

Authorized use of this document

This document is being provided by ASME and CSA Group for informational and non-commercial use only. The user of this document is authorized to do only the following:

If this document is in electronic form:

  • load this document onto a computer for the sole purpose of reviewing it;

  • search and browse this document; and

  • print this document if it is in PDF format.

Limited copies of this document in print or paper form may be distributed only to persons who are authorized by ASME and CSA Group to have such copies, and only if this Legal Notice appears on each such copy.

In addition, users may not and may not permit others to

  • alter this document in any way or remove this Legal Notice from the attached standard;

  • sell this document without authorization from ASME and CSA Group ; or

  • make an electronic copy of this document.

If you do not agree with any of the terms and conditions contained in this Legal Notice, you may not load or use this document or make any copies of the contents hereof, and if you do make such copies, you are required to destroy them immediately. Use of this document constitutes your acceptance of the terms and conditions of this Legal Notice.



Standards Update Service

ASME A112.19.1-2018/CSA B45.2-18

July 2018


Title: Enamelled cast iron and enamelled steel plumbing fixtures

To register for e-mail notification about any updates to this publication

  • go to shop.csa.ca

  • click on CSA Update Service

The List ID that you will need to register for updates to this publication is 2425997.

If you require assistance, please e-mail techsupport@csagroup.org or call 416-747-2233.

Visit CSA Group’s policy on privacy at www.csagroup.org/legal to find out how we protect your personal information.

ASME/CSA Standard


ASME A112.19.1-2018/CSA B45.2-18

Enamelled cast iron and enamelled steel plumbing fixtures






®A trademark of the Canadian Standards Association and CSA America Inc., operating as “CSA Group”


Published in July 2018 by CSA Group

A not-for-profit private sector organization

178 Rexdale Boulevard, Toronto, Ontario, Canada M9W 1R3 1-800-463-6727 • 416-747-4044

Visit the CSA Group Online Store at shop.csa.ca


The American Society of Mechanical Engineers (ASME) Three Park Avenue

New York, NY 10016-5990, USA 1-800-843-2763

Visit the ASME Online Store at www.asme.org

Commitment for Amendments

This Standard is issued jointly by the American Society of Mechanical Engineers (ASME) and the Canadian Standards Association (Operating as “CSA Group”). Amendments to this Standard will be made only after processing according to the Standards writing procedures of both ASME and CSA Group.


The American Society of Mechanical Engineers (ASME)

Three Park Avenue

New York, NY 10016-5990 USA

1-800-843-2763

Visit the ASME Online Store at www.asme.org

Published in June 2018 by CSA Group

A not-for-profit private sector organization 178 Rexdale Boulevard

Toronto, Ontario, Canada M9W 1R3

1-800-463-6727 or 416-747-4044

Visit the CSA Group Online Store at shop.csa.ca

Copyright © 2018 by The American Society of Mechanical Engineers (ASME)

ISBN 978-1-4883-1308-0

© 2018 Canadian Standards Association

This Standard is available for public review on a continuous basis. This provides an opportunity for additional public input from industry, academia, regulatory agencies, and the public at large.

All rights reserved. No part of this publication may be reproduced in any form whatsoever without the prior permission of the publisher.

Contents

ASME A112 Standards Committee on Plumbing Materials and Equipment 3 ASME A112.19.1 Project Team on Enameled Cast Iron Plumbing Fixtures 7 CSA Technical Committee on Plumbing Fixtures 9

CSA/ASME Harmonization Task Group on Plumbing Fixtures 14


Preface 16


0 Introduction 18


  1. Scope 18


  2. Reference publications 19


  3. Definitions 20


  4. General requirements 22

    1. General 22

      1. Materials 22

      2. Surface finish 22

      3. Quality of work 22

      4. Wall brackets 22

    2. Cast iron thickness 22

    3. Tolerances 22

      1. General 22

      2. Apron bathtubs 22

    4. Enamel 23

      1. General 23

      2. Specular gloss 23

      3. Reflectance 23

      4. Enamel thickness 23

      5. Surface treatments 23

    5. Waste fitting openings, drainage, and overflows 23

      1. Waste fitting openings and drainage 23

      2. Overflows 24

    6. Additional requirements for lavatories and sinks — Openings and mounting surfaces for supply fittings 24

    7. Additional requirements for bathtubs and shower bases 24

      1. Minimum dimensions for bathtubs 24

      2. Slope to the waste outlet 25

      3. Flanges 25

      4. Slip-resistant surfaces 25

    8. Additional requirements for drinking fountains 25

    9. Accessible design fixtures 25

  5. Test methods 25

    1. Acid resistance test 25

      1. Procedure 25

      2. Performance 26

    2. Surface examination 26

      1. Procedure 26

      2. Performance 26

    3. Warpage test 26

      1. Procedure 26

      2. Performance 26

    4. Field-installed tiling-flange seal test 26

      1. Procedure 26

      2. Performance 27

    5. Overflow test (lavatories and sinks) 27

      1. Procedure 27

      2. Performance 27

    6. Structural integrity tests for enamelled steel bathtubs, lavatories, and sinks 27

      1. Bathtubs 27

      2. Lavatories and sinks 29

      3. Surface examination 30


  6. Markings, packaging, and literature 30

    1. General 30

    2. Non-standard fixtures 30

    3. Field-installed flanges 30

    4. Packaging 31


Annex A (informative) — Unit conversion criteria 38

ASME A112 Standards Committee on Plumbing Materials and Equipment


W. M. Smith

American Society of Plumbing Engineers, Montgomery, Alabama, USA

Chair


S. Rawalpindiwala

Kohler Co.,

Kohler, Wisconsin, USA

Vice-Chair


M. R. Gibeault

Kohler Co.,

Kohler, Wisconsin, USA

Alternate to: S. Rawalpindiwala

Alternate


R. K. Adler

City of San Jose,

San Jose, California, USA


J. A. Ballanco

JB Engineering & Code Consulting, PC, Munster, Indiana, USA


J. E. Bertrand

Moen Incorporated,

North Olmsted, Ohio, USA


R. Burnham

Zurn Industries LLC, Erie, Pennsylvania, USA


M. Campos

ICC Evaluation Service, LLC, Brea, California, USA


S. L. Cavanaugh

Cavanaugh Consulting, Santa Fe, New Mexico, USA

Contributing Member


W. E. Chapin

Professional Code Consulting, LLC, Cullman, Alabama, USA


P. V. DeMarco

IAPMO,

Dayton, New Jersey, USA


N. E. Dickey

CSA Group,

Cleveland, Ohio,, USA


F. DiFolco

CSA Group,

Toronto, Ontario, Canada

Alternate to: N. Dickey

Alternate


G. S. Duren

Code Compliance, Inc.,

South Pasadena, Florida, USA


R. Emmerson

Consultant,

Mundelein, Illinois, USA


R. L. George

Plumb-Tech Design and Consulting Services L.L.C, Newport, Michigan, USA


D. Gleiberman

Sloan Valve Company,

Los Angeles, California, USA


J.W. Lauer

Sloan Valve Company, Anaheim, California, USA Alternate to: D. Gleiberman

Alternate


M. Guard

Bradley Corporation,

Menomonee Falls, Wisconsin, USA


G. W. Harrison

Wayne Harrison Consulting, Edmond, Oklahoma, USA


L. Himmelblau

Chicago Faucet,

Des Plaines, Illinois, USA


C. L. Jahrling

ASSE International, Chicago, Illinois, USA

Contributing Member


J. M. Koeller

Koeller and Co.,

Yorba Linda, California, USA


N. M. Kummerlen

Consultant, Lorain, Ohio, USA

Contributing Member


C. J. Lagan

American Standard/LIXIL, Piscataway, New Jersey, USA


M. Malatesta

American Standard/LIXIL, Piscataway, New Jersey, USA Alternate to: C.J. Lagan

Alternate


W. H. LeVan

Cast Iron Soil Pipe Institute, Panama City Beach, Florida, USA


D. Marbry

Fluidmaster, Inc.,

San Juan Capistrano, California, USA


R. Mata

CSA Group, Cleveland, Ohio, USA


D. Liang

CSA Group, Guangzhou, China Alternate to: R. Mata

Alternate



L.A. Mercer

IAPMO Group,

Valley City, Ohio, USA


D. Viola

IAPMO Group, Mokena, Illinois, USA

Alternate to: L.A. Mercer

Altnerate



A. Murra

Consultany,

Oakville, Ontario, Canada


D. Orton

NSF International,

Ann Arbor, Michigan, USA


A. Ciechanowski

NSF International,

Ann Arbor, Michigan, USA

Alternate to: D. Orton

Alternate


R. Pickering

Eastern Research Group, Inc., Morrisville, North Carolina, USA

Contributing Member


L. Pilla

CSA Group,

Toronto, Ontario, Canada

Contributing Member


A. Poon

Delta Faucet Company, Indianapolis, Indiana, USA


S. A. Remedios

Remedios Consulting LLC, London, Ontario, Canada


M. Sigler

Plumbing Manufacturers International, Orlando, Florida, USA


G. L. Simmons

Charlotte Pipe & Foundry, Charlotte, North Carolina, USA


W.B. Morris

Charlotte Pipe & Foundry, Charlotte, North Carolina, USA Alternate to: G.L. Simmons

Alternate



S. Tanner

U.S. Environmental Protection Agency, Washington, District of Columbia, USA

Contributing Member


J. C. Watson

Elkay Manufacturing, Oak Brook, Illinois, USA


M. Weiss

Plumbing and Drainage Institute, Polson, Montana, USA


W. C. Whitehead

Whitehead Consulting Services, Peabody, Massachusetts, USA