No products
View larger
ASME B107.110-2019
M00052525
New product
ASME B107.110-2019 Socket Wrenches, Handles, and Attachments
standard by ASME International, 06/15/2020
Full Description
This Standard provides performance and safety requirements for socket wrenches (sockets), handles used with these wrenches, nutdrivers, and attachments used with socket wrenches, hereinafter collectively referred to as tools. Inclusion of dimensional data in this Standard is not intended to imply that all of the products described herein are stock production sizes. Consumers are requested to consult with manufacturers concerning lists of stock production sizes and lengths.Note: This Standard is a consolidation of ASME B107.1, B107.2, B107.10, B107.12, and B107.34.
In stock
More info
Socket Wrenches, Handles, and Attachments
AN A MERICAN NA TIONAL S T AND ARD
ASME B107.110-2019
(Revision of ASME B107.110-2012)
ASME B107.110-2019
(Revision of ASME B107.110-2012)
Socket Wrenches,
Handles, and Attachments
AN AMERICAN NATIONAL STANDARD
Date of Issuance: June 15, 2020
This Standard will be revised when the Society approves the issuance of a new edition.
ASME issues written replies to inquiries concerning interpretations of technical aspects of this Standard. Interpretations are published on the Committee web page and under https://go.asme.org/InterpsDatabase. Periodically certain actions of the ASME B107 Committee may be published as Cases. Cases are published on the ASME website under the B107 Committee Page at https://go.asme.org/B107committee as they are issued.
Errata to codes and standards may be posted on the ASME website under the Committee Pages to provide corrections to incorrectly published items, or to correct typographical or grammatical errors in codes and standards. Such errata shall be used on the date posted.
The B107 Committee Page can be found at https://go.asme.org/B107committee. There is an option available to automatically receive an e-mail notification when errata are posted to a particular code or standard. This option can be found on the appropriate Committee Page after selecting “Errata” in the “Publication Information” section.
ASME is the registered trademark of The American Society of Mechanical Engineers.
This code or standard was developed under procedures accredited as meeting the criteria for American National Standards. The Standards Committee that approved the code or standard was balanced to assure that individuals from competent and concerned interests have had an opportunity to participate. The proposed code or standard was made available for public review and comment that provides an opportunity for additional public input from industry, academia, regulatory agencies, and the public-at-large.
ASME does not “approve,” “rate,” or “endorse” any item, construction, proprietary device, or activity.
ASME does not take any position with respect to the validity of any patent rights asserted in connection with any items mentioned in this document, and does not undertake to insure anyone utilizing a standard against liability for infringement of any applicable letters patent, nor assume any such liability. Users of a code or standard are expressly advised that determination of the validity of any such patent rights, and the risk of infringement of such rights, is entirely their own responsibility.
Participation by federal agency representative(s) or person(s) affiliated with industry is not to be interpreted as government or industry endorsement of this code or standard.
ASME accepts responsibility for only those interpretations of this document issued in accordance with the established ASME procedures and policies, which precludes the issuance of interpretations by individuals.
No part of this document may be reproduced in any form, in an electronic retrieval system or otherwise,
without the prior written permission of the publisher.
The American Society of Mechanical Engineers Two Park Avenue, New York, NY 10016-5990
Copyright © 2020 by
THE AMERICAN SOCIETY OF MECHANICAL ENGINEERS
All rights reserved Printed in U.S.A.
CONTENTS
Foreword . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . vii
Committee Roster . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . viii
Correspondence With the B107 Committee . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ix
1 Scope . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
2 References . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
3 Classification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
4 Performance Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
5 Tests . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
6 Safety Requirements and Limitations of Use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
Nonmandatory Appendix
A Figures | Designations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . | 64 |
3-1 | Category 1 and 2, Type I, II; and Category 2, Type VII Sockets . . . . . . . . . . . . . . . . . . . . . . . | 3 |
3-2 | Category 1 and 2, Type III, Universal Sockets, Single Hexagon (6-Point) and Double Hexagon (12-Point) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . | 4 |
4.2.3-1 | Category 2, Type IV, Bar Extension . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . | 33 |
4.2.4-1 | Category 2, Type V, Adapter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . | 33 |
4.2.5-1 | Category 2, Type VI, Universal Joints . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . | 34 |
4.3.1-1 | Category 10, Type I, Class 1, Handles, Hinged . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . | 44 |
4.3.1-2 | Category 10, Type I, Class 2, Handles, Ratchet, Reversible . . . . . . . . . . . . . . . . . . . . . . . . . . | 44 |
4.3.1-3 | Category 10, Type I, Class 3, Style A, Handles: Speeder, Brace Type, Single Revolving Handgrip . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . | 46 |
4.3.1-4 | Category 10, Type I, Class 3, Style B, Handles: Speeder, Spin Type, Screwdriver Grip . . . . . . . | 46 |
4.3.1-5 | Category 10, Type I, Class 4, Handles, T, Sliding . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . | 46 |
4.3.2-1 | Category 10, Type II, Class 2, Style B, Attachments, Extension Bar, Flexible . . . . . . . . . . . . . . | 47 |
4.3.2-2 | Category 10, Type II, Class 3, Style A, Attachments, Adapter, Socket Wrench . . . . . . . . . . . . . | 48 |
4.3.2-3 | Category 10, Type II, Class 3, Style B, Attachments, Adapter, Ratchet . . . . . . . . . . . . . . . . . . | 49 |
4.4.1-1 | Category 12, Type I, Class 1, Styles A and B: Conventional Length Nutdriver With Solid Shaft . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . | 50 |
4.4.2-1 | Category 12, Type I, Class 2, Styles A and B: Conventional Length Nutdriver With Hollow Shaft . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . | 52 |
4.4.3-1 | Category 12, Type II, Styles A and B: Stubby Length Nutdriver . . . . . . . . . . . . . . . . . . . . . . . | 53 |
4.4.4-1 | Category 12, Type III: Miniature Handle Nutdriver . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . | 54 |
4.5-1 | Category 34 Socket Wrenches for Spark Plugs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . | 57 |
5.9-1 | Category 12 Torsional Moment Test . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . | 61 |
5.10-1 | Category 12 Bending Moment Test . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . | 63 |
Tables 3-1 | Classification for Socket Wrenches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . | 2 |
4.1.5-1 | Category 1, Type I Sockets, Single Hexagon and Double Hexagon, 1/4 in. Drive . . . . . . . . . . . | 5 |
4.1.5-1M | Category 1, Type I Sockets, Single Hexagon and Double Hexagon, 1/4 in. Drive . . . . . . . . . . . | 5 |
4.1.5-2 | Category 1, Type I Sockets, Single Hexagon and Double Hexagon, 3/8 in. Drive . . . . . . . . . . . | 6 |
4.1.5-2M | Category 1, Type I Sockets, Single Hexagon and Double Hexagon, 3/8 in. Drive . . . . . . . . . . . | 6 |
4.1.5-3 | Category 1, Type I Sockets, Single Hexagon and Double Hexagon, 1/2 in. Drive . . . . . . . . . . . | 7 |
4.1.5-3M | Category 1, Type I Sockets, Single Hexagon and Double Hexagon, 1/2 in. Drive . . . . . . . . . . . | 8 |
4.1.5-4 | Category 1, Type I Sockets, Single Hexagon and Double Hexagon, 3/4 in. Drive . . . . . . . . . . . | 9 |
4.1.5-4M | Category 1, Type I Sockets, Single Hexagon and Double Hexagon, 3/4 in. Drive . . . . . . . . . . . | 10 |
4.1.5-5 | Category 1, Type I Sockets, Single Hexagon and Double Hexagon, 1 in. Drive . . . . . . . . . . . . . | 11 |
4.1.5-5M | Category 1, Type I Sockets, Single Hexagon and Double Hexagon, 1 in. Drive . . . . . . . . . . . . . | 12 |
4.1.5-6 | Category 1, Type II Sockets, Square, 4-Point and 8-Point, 1/4 in. Drive . . . . . . . . . . . . . . . . . | 12 |
4.1.5-7 | Category 1, Type II Sockets, Square, 4-Point and 8-Point, 3/8 in. Drive . . . . . . . . . . . . . . . . . | 12 |
4.1.5-8 | Category 1, Type II Sockets, Square, 4-Point and 8-Point, 1/2 in. Drive . . . . . . . . . . . . . . . . . | 13 |
4.1.5-9 | Category 1, Type III Sockets, Universal Joint, Single Hexagon and Double Hexagon, 1/4 in. Drive | 13 |
4.1.5-9M | Category 1, Type III Sockets, Universal Joint, Single Hexagon and Double Hexagon, 1/4 in. Drive | 13 |
4.1.5-10 | Category 1, Type III Sockets, Universal Joint, Single Hexagon and Double Hexagon, 3/8 in. Drive | 14 |
4.1.5-10M | Category 1, Type III Sockets, Universal Joint, Single Hexagon and Double Hexagon, 3/8 in. Drive | 14 |
4.1.5-11 | Category 1, Type III Sockets, Universal Joint, Single Hexagon and Double Hexagon, 1/2 in. Drive | 14 |
4.1.5-11M | Category 1, Type III Sockets, Universal Joint, Single Hexagon and Double Hexagon, 1/2 in. Drive | 15 |
4.2.1-1 | Category 2, Type I Sockets, Single Hexagon (6-Point) and Double Hexagon (12-Point), 1/4 in. Drive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . | 16 |
4.2.1-1M | Category 2, Type I Sockets, Single Hexagon (6-Point) and Double Hexagon (12-Point), 1/4 in. Drive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . | 16 |
4.2.1-2 | Category 2, Type I Sockets, Single Hexagon (6-Point) and Double Hexagon (12-Point), 3/8 in. Drive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . | 17 |
4.2.1-2M | Category 2, Type I Sockets, Single Hexagon (6-Point) and Double Hexagon (12-Point), 3/8 in. Drive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . | 17 |
4.2.1-3 | Category 2, Type I Sockets, Single Hexagon (6-Point) and Double Hexagon (12-Point), 1/2 in. Drive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . | 18 |
4.2.1-3M | Category 2, Type I Sockets, Single Hexagon (6-Point) and Double Hexagon (12-Point), 1/2 in. Drive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . | 19 |
4.2.1-4 | Category 2, Type I Sockets, Single Hexagon (6-Point) and Double Hexagon (12-Point), 3/4 in. Drive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . | 20 |
4.2.1-4M | Category 2, Type I Sockets, Single Hexagon (6-Point) and Double Hexagon (12-Point), 3/4 in. Drive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . | 21 |
4.2.1-5 | Category 2, Type I Sockets, Single Hexagon (6-Point) and Double Hexagon (12-Point), | |
1 in. Drive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . | 22 | |
4.2.1-5M | Category 2, Type I Sockets, Single Hexagon (6-Point) and Double Hexagon (12-Point), | |
1 in. Drive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . | 23 | |
4.2.1-6 | Category 2, Type I Sockets, Single Hexagon (6-Point) and Double Hexagon (12-Point), 11/2 in. Drive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . | 24 |
4.2.1-7 | Category 2, Type I Sockets, Single Hexagon (6-Point), 21/2 in. Drive . . . . . . . . . . . . . . . . . . . | 25 |
4.2.1-8 | Category 2, Type I Sockets, Single Hexagon (6-Point) and Double Hexagon (12-Point), Thin Wall, 1/2 in. Drive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . | 26 |
4.2.1-9 | Category 2, Type I Sockets, Single Hexagon (6-Point) and Double Hexagon (12-Point), Thin Wall, 3/4 in. Drive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . | 27 |
4.2.1-10 | Category 2, Type II Sockets, Single Square (4-Point) and Double Square (8-Point), 3/8 in. Drive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . | 28 |
4.2.1-11 | Category 2, Type II Sockets, Single Square (4-Point) and Double Square (8-Point), 1/2 in. Drive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . | 28 |
4.2.1-12 | Category 2, Type II Sockets, Single Square (4-Point) and Double Square (8-Point), 3/4 in. Drive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . | 29 |
4.2.1-13 | Category 2, Type VII Sockets, Single Hexagon (6-Point) and Double Hexagon (12-Point), | |
#5 Spline Drive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . | 30 | |
4.2.2-1 | Category 2, Type III Universal Sockets, Single Hexagon (6-Point) and Double Hexagon (12-Point), 3/8 in. Drive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . | 31 |
4.2.2-1M | Category 2, Type III Universal Sockets, Single Hexagon (6-Point) and Double Hexagon (12-Point), 3/8 in. Drive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . | 31 |
4.2.2-2 | Category 2, Type III Universal Sockets, Single Hexagon (6-Point) and Double Hexagon (12-Point), 1/2 in. Drive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . | 32 |
4.2.2-2M | Category 2, Type III Universal Sockets, Single Hexagon (6-Point) and Double Hexagon (12-Point), 1/2 in. Drive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . | 32 |
4.2.3-1 | Category 2, Type IV, Bar Extension . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . | 33 |
4.2.3-2 | Length Ranges for Category 2, Type IV, Bar Extension . . . . . . . . . . . . . . . . . . . . . . . . . . . . . | 33 |
4.2.4-1 | Category 2, Type V, Adapters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . | 34 |
4.2.5-1 | Category 2, Type VI, Universal Joint . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . | 34 |
4.2.5-2 | Length Classes for 1/4 in. Drive Socket Wrenches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . | 35 |
4.2.5-3 | Length Classes for 3/8 in. Drive Socket Wrenches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . | 36 |
4.2.5-4 | Length Classes for 1/2 in. Drive Socket Wrenches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . | 37 |
4.2.5-5 | Length Classes for 3/4 in. Drive Socket Wrenches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . | 38 |
4.2.5-6 | Length Classes for 1, 11/2, 21/2 in. and #5 Spline Drive Socket Wrenches . . . . . . . . . . . . . . . | 39 |
4.2.5-7M | Length Classes for Metric Socket Wrenches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . | 41 |
4.3.1-1 | Category 10, Type I, Class 1, Handles, Hinged . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . | 44 |
4.3.1-2 | Category 10, Type I, Class 2, Handles, Ratchet, Reversible . . . . . . . . . . . . . . . . . . . . . . . . . . | 45 |
4.3.1-3 | Category 10, Type I, Class 3, Style A, Handles: Speeder, Brace Type, Single Revolving Handgrip | 46 |
4.3.1-4 | Category 10, Type I, Class 3, Style B, Handles: Speeder, Spin Type, Screwdriver Grip . . . . . . . | 46 |
4.3.1-5 | Category 10, Type I, Class 4, Handles, T, Sliding . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . | 47 |
4.3.2-1 | Category 10, Type II, Class 1, Attachments, Universal Joint . . . . . . . . . . . . . . . . . . . . . . . . . . | 47 |
4.3.2-2 | Category 10, Type II, Class 2, Style A, Attachments, Extension Bar, Solid . . . . . . . . . . . . . . . . | 47 |
4.3.2-3 | Length Ranges for Category 10, Type II, Class 2, Style A, Attachments, Extension Bar, Solid . . | 48 |
4.3.2-4 | Category 10, Type II, Class 2, Style B, Attachments, Extension Bar, Flexible . . . . . . . . . . . . . . | 48 |
4.3.2-5 | Category 10, Type II, Class 3, Style A, Attachments, Adapter, Socket Wrench . . . . . . . . . . . . . | 48 |
4.3.2-6 | Category 10, Type II, Class 3, Style B, Attachments, Adapter, Ratchet . . . . . . . . . . . . . . . . . . | 49 |
4.4.1-1 | Category 12, Type I, Class 1, Styles A and B: Conventional Length Nutdriver With Solid Shaft |
|