IEEE C37.60-2003 IEEE Standard Requirements for Overhead, Pad Mounted, Dry Vault, and Submersible Automatic Circuit Reclosers and Fault Interrupters for alternating current systems up to 38 kV

standard by IEEE, 08/11/2003

Full Description

Scope

This standard applies to all overhead, pad-mounted, dry vault, and submersible single- or multipolealternating current automatic circuit reclosers and fault interrupters for rated maximum voltagesabove 1000V and up to 38 kV. In order to simplify this standard where possible, the term recloser/FI (reclosers/FIs) has been substituted for automatic circuit recloser or fault interrupter or both. NOTE--When reclosers are applied in substation, special considerations may apply.

Purpose

The purpose of this project is to revise existing standard including, but not limited to: a) general update to bring the standard in line with current technology; b) update information on BIL, altitude correction, temperature rise; c) add information on other interrupting/insulating media (e.g. SF6); d) add transient recovery voltage requirements; e) add voltage ratings common to systems outside of North America

Abstract

Revision Standard - Superseded.IEEE Std C37.60-2003, IEEE Standard for Overhead, Pad-Mounted, Dry Vault, and Submersible Automatic Circuit Reclosers and Fault Interrupters for Alternating Current Systems Up to 38 kV

Product Details

Published: 08/11/2003 ISBN(s): 9780738135892 Number of Pages: 71 File Size: 1 file , 760 KB Product Code(s): STDSU95090