IEEE 303-1984 IEEE Recommended Practice for Auxiliary Devices for Motors in Class 1 - Groups A, B, C, and D, Division 2 Locations

standard by IEEE, 06/13/1984

Full Description

Scope

The scope of this recommended practice is limited to auxiliary devices associated with motors operating in Division 2 areas, classified as Class 1, Groups A, B, C, and D locations.This recommended practice is not an attempt to rewrite or otherwise supersede applicable sections of ANSI/NFPA 70-1984, National Electrical Code (NEC) or any other codes or ordinances. It is intended, rathere, to serve as a supplement to existing codes that in this area are not sufficiently specific t o serve as a guide to good engineering practice. The guidance contained herein, thereefore, is in addition to the ANSI/NFPA 70-1984 requirements for wiring systems for hazardous (classified) areas.

Purpose

The following information is intended to bring together a brief description of basic electrical practices in regard t o the application and installation of auxiliary devices to motorsoperating in Class 1, Groups A, B, C, and D, Division 2 areas. It should be understood thatthis information is only a guide t o promote consistent application o f such devices and mustbe used with sound engineering judgment.

Abstract

Revision Standard - Superseded.

Product Details

Published: 06/13/1984 ISBN(s): 9781504402811 Number of Pages: 8 File Size: 1 file , 840 KB Product Code(s): STDSU09415