Rules for OverpressureProtectionSECTION XIIIASME BPVC.XIII-20232023 ASME...
ð23PART KDDESIGN REQUIREMENTSARTICLE KD-1GENERALKD-100 SCOPEa The...
ASME BPVC.VIII.2-2023Division 2Alternative RulesSECTION VIIIRules for...
SECTION VIIIRules for Construction of Pressure VesselsASME...
Recommended Guidelinesfor the Care of Power BoilersSECTION VIIASME...
Viewed products
Code of practice for legal...
IEC 62788-1-4 Ed. 1.1 b:2020...
WRC 198 Part 1: Secondary Stress Indices for Integral Structural Attachments to Straight Pipe Bulletin / Circular by Welding Research Council, Inc., 1974 W. G. Dodge Full Description This report presents a simplified method for calculating the stresses induced...
WRC 197 A Review of Underclad Cracking in Pressure-Vessel Components Bulletin / Circular by Welding Research Council, Inc., 1974 A. G. Vinckier, A. W. Pense Full Description This review encompasses a very large body of data obtained both from the open technical...
WRC 196 Electron Beam Welding Bulletin / Circular by Welding Research Council, Inc., 1974 M. M. Schwartz Full Description The first interpretive report on electron-beam welding, WRC Bulletin 100, covered the early pioneering stages of the process and the men...
WRC 195 Part 1: A Review of Bounding Techniques in Shakedown and Ratcheting at Elevated Temperatures Bulletin / Circular by Welding Research Council, Inc., 1974 F. A. Leckie Full Description The life span of stressed components operating at high temperature is...
WRC 194 Fatigue Behavior of Pressure-Vessel Steels Bulletin / Circular by Welding Research Council, Inc., 1974 J. M. Barsom Full Description The regulations governing the design of pressure vessels are based on experience gained over many operational years and...
WRC 193 Basic Considerations for Tubular Joint Design in Offshore Construction Bulletin / Circular by Welding Research Council, Inc., 1974 P.W. Marshall Full Description Background data for Tubular Joint Design Rules in American Codes (API RP 2A and AWS...
WRC 180 Elastic-Plastic Bending of a Constrained Circular Perforated Plate Under Uniform Pressure (Triangular Penetration Pattern) Bulletin / Circular by Welding Research Council, Inc., 1973 J. S. Porowski, W. J. O'Donnell Full Description The concept of...
WRC 188 Part 1: Behavior and Design of Steel Beam-to-Column Moment Connections Bulletin / Circular by Welding Research Council, Inc., 1973 J. S. Huang, W. F. Chen, L. S. Beedle Full Description This investigation is concerned with beam-to-column moment...
WRC 187 High-Temperature Brazing Bulletin / Circular by Welding Research Council, Inc., 1973 H.E. Pattee Full Description The need to produce oxidation- and corrosion-resistant joints for service at high temperatures, and the need to develop brazing filler...
WRC 186 Part 1: Design Options for Selection of Fracture Control Procedures in the Modernization of Codes, Rules and Standards Bulletin / Circular by Welding Research Council, Inc., 1973 J. R. Frederick, J. A. Sydel Full Description Procedures for application...
WRC 185 Improved Discontinuity Detection Using Computer-Aided Ultrasonic Pulse-Echo Techniques Bulletin / Circular by Welding Research Council, Inc., 1973 J. R. Frederick, J. A. Sydel Full Description The purpose of this project has been to investigate means...
WRC 184 Submerged-Arc-Weld Hardness and Cracking in Wet Sulfide Service Bulletin / Circular by Welding Research Council, Inc., 1973 D. J. Kotecki, D. G. Howden Full Description The codes covering fabrication of virtually all steel structures and pressure...