Rules for OverpressureProtectionSECTION XIIIASME BPVC.XIII-20232023 ASME...
ð23PART KDDESIGN REQUIREMENTSARTICLE KD-1GENERALKD-100 SCOPEa The...
ASME BPVC.VIII.2-2023Division 2Alternative RulesSECTION VIIIRules for...
SECTION VIIIRules for Construction of Pressure VesselsASME...
Recommended Guidelinesfor the Care of Power BoilersSECTION VIIASME...
Viewed products
BS 06/30134861 DC...
WRC 111...
WRC 161 The Fabrication and Welding of High-Strength Line-Pipe Steels Bulletin / Circular by Welding Research Council, Inc., 1971 H. Thomasson Full Description In April 1962, A. G. Barkow wrote an excellent review of pipeline construction and welding practices...
WRC 160 High-Frequency Resistance Welding Bulletin / Circular by Welding Research Council, Inc., 1971 D.C. Martin Full Description The purpose of this report is to present in one place the widely scattered knowledge of the high-frequency resistance-welding...
WRC 159 Welding of Maraging Steels Bulletin / Circular by Welding Research Council, Inc., 1971 F.H. Lang, N. Kenyon Full Description Maraging steels are iron-nickel alloys designed to combine high strength with good fracture toughness. The properties are...
WRC 158 PVRC Interpretive Report of Pressure Vessel Research, Section 3 - Fabrication and Environmental Considerations Bulletin / Circular by Welding Research Council, Inc., 1971 A.P. Bunk Full Description This section of the "PVRC lnterpretive Report of...
WRC 166 Part 1: Review of Service Experience and Test Data on Openings in Pressure Vessels with Non-Integral Reinforcing Bulletin / Circular by Welding Research Council, Inc., 1971 E.C. Rodabaugh Full Description An extensive test program on nozzles and...
WRC 168 Lamellar Tearing Bulletin / Circular by Welding Research Council, Inc., 1971 J.E.M. Jubb Full Description Most publications on lamellar tearing relate to metallurgical investigations, although some process work has been carried out. At present the...
Methods of High-Alloy Weldability Evaluation Book by Welding Research Council, Inc., 1970 Welding Research Council, Inc. Full Description Foreword by J. M. GerkenDevelopment of the R. P. I. Gleeble Equipment W.F. Savage(Abstract)Correlation of Hot Ductility Curves with...
WRC 151 Further Theoretical Treatment of Perforated Plates with Square Penetration Patterns Bulletin / Circular by Welding Research Council, Inc., 1970 W.J. O'Donnel Full Description In this paper the theoretical validity of the equivalent homogeneous...
WRC 150 Part 1: Recent Studies of Cracking During Postwelding Heat Treatment of Nickel-Base Alloys: Evaluating the Resistance of Rene' 41 to Strain-Age Cracking Bulletin / Circular by Welding Research Council, Inc., 1970 R.W. Fawley, M. Prager, Ph.D. Full Description...
WRC 149 Control of Distortion and Shrinkage in Welding Bulletin / Circular by Welding Research Council, Inc., 1970 K. Masubuchi Full Description This interpretive report covers the development of analytical means for predicting and controlling weld distortion....
WRC 148 Interaction Curves for Sections Under Combined Biaxial Bending and Axial Force Bulletin / Circular by Welding Research Council, Inc., 1970 S. Santathadaporn, W.F. Chen Full Description Limit analysis is applied to obtain interaction equations for...
WRC 147 Transition-Temperature Data for Five Structural Steels Bulletin / Circular by Welding Research Council, Inc., 1970 J.H. Gross Full Description Because of difficulties in establishing appropriate criteria for evaluating transition-temperature curves for...