Rules for OverpressureProtectionSECTION XIIIASME BPVC.XIII-20232023 ASME...
ð23PART KDDESIGN REQUIREMENTSARTICLE KD-1GENERALKD-100 SCOPEa The...
ASME BPVC.VIII.2-2023Division 2Alternative RulesSECTION VIIIRules for...
SECTION VIIIRules for Construction of Pressure VesselsASME...
Recommended Guidelinesfor the Care of Power BoilersSECTION VIIASME...
Viewed products
AS 4632:2020...
BS 8850:2020...
WRC 152 Influence of Weld Defects on the Mechanical Properties of Aluminum Alloy Weldments Bulletin / Circular by Welding Research Council, Inc., 1970 A.W. Pense, R.D. Stout Full Description A literature survey was conducted to determine the information...
Effects of Minor Elements on the Weldability of High-Nickel Steel Book by Welding Research Council, Inc., 1969 Welding Research Council, Inc.
WRC 139 Part 1: Stress Concentrations in Two Normally Intersecting Cylindrical Shells Subject to Internal Pressure Bulletin / Circular by Welding Research Council, Inc., 1969 A.C. Erigen, A.K. Naghdi, S.S. Mahmood, C.C.Thiel, T. Ariman Full Description This...
WRC 138 Intergranular Corrosion of Chromium-Nickel Stainless Steels-Final Report Bulletin / Circular by Welding Research Council, Inc., 1969 Subcommittee on Field Corrosion Tests Full Description During the past three decades the chromium-nickel stainless...
WRC 137 Current Welding Research Problems Bulletin / Circular by Welding Research Council, Inc., 1969 Welding Research Council, Inc. Full Description This list is published to inform Welding Research Council Project Committees and University Research Workers of...
WRC 143 Cast Heat-Resistant Alloys for High-Temperature Weldments Bulletin / Circular by Welding Research Council, Inc., 1969 H.S. Avery Full Description The metal in castings and the filler metal in weldments have much in common. Where such weldments are...
WRC 142 Part 1: Experiments on Wide-Flange Beams Under Moment Gradient Bulletin / Circular by Welding Research Council, Inc., 1969 A.F. Lukey, R.J. Smith, M.U. Hosain, P.F. Adams Full Description This report presents the results of experiments performed on 24...
WRC 141 Integration of Metallurgical and Fracture Mechanics Concepts of Transition Temperature Factors Relating to Fracture-Safe Design for Structural Steels Bulletin / Circular by Welding Research Council, Inc., 1969 W.S. Pellini, F.J. Loss Full Description...
WRC 140 Fracture Toughness Characterization Procedures and Interpretations to Fracture-Safe Design for Structural Aluminum Alloys Bulletin / Circular by Welding Research Council, Inc., 1969 R.W. Judy, Jr., R.J. Goode and C.N. Freed Full Description...
WRC 127 Girder Web Boundary Stresses and Fatigue Bulletin / Circular by Welding Research Council, Inc., 1968 J.A. Mueller, B.T. Yen Full Description The objective of this report is to define the primary cause of fatigue cracks observed in the webs of welded...
WRC 129 Elastic Stresses in Pressure Vessel Heads Bulletin / Circular by Welding Research Council, Inc., 1968 H. Kraus Full Description The analysis of stresses in pressure vessels has had a long and active history. Its development has, naturally, been tied to...
WRC 128 Welding of Precipitation-Hardening Nickel-Base Alloys Bulletin / Circular by Welding Research Council, Inc., 1968 M. Prager, Ph.D., C.S. Shira Full Description Precipitation-hardenable nickel-base alloys possess good strength, ductility, and corrosion...