Rules for OverpressureProtectionSECTION XIIIASME BPVC.XIII-20232023 ASME...
ð23PART KDDESIGN REQUIREMENTSARTICLE KD-1GENERALKD-100 SCOPEa The...
ASME BPVC.VIII.2-2023Division 2Alternative RulesSECTION VIIIRules for...
SECTION VIIIRules for Construction of Pressure VesselsASME...
Recommended Guidelinesfor the Care of Power BoilersSECTION VIIASME...
WRC 410 Evaluation of Design Criteria for Storage Tanks with Frangible Roof Joints Bulletin / Circular by Welding Research Council, Inc., 1996 D. Swenson, D. Fenton, Z. Lu, A. Ghori, J. Baalman Full Description API 650 (API, 1993) provides design criteria for...
WRC 417 Design Guide to Reduce Potential for Vibration Caused by Fluid Flow Inside Pipes - Review and Survey Bulletin / Circular by Welding Research Council, Inc., 1996 C. W. Lin Full Description Flow-induced piping vibration problems are common occurrences in...
WRC 415 Literature Survey and Interpretive Study on Thermoplastic and Reinforced-Thermosetting-Resin Piping and Component Standards Bulletin / Circular by Welding Research Council, Inc., 1996 W. E. Short II, G. F. Leon, G. E. O. Widera, C. G. Ziu Full Description...
WRC 408 Bolted Flange Assembly: Preliminary Elastic Interaction Data and Improved Bolt-Up Procedures Bulletin / Circular by Welding Research Council, Inc., 1996 G. Bibel, R. Ezell Full Description Design bolt loading in a bolted flange connection is difficult...
WRC 412 Challenges and Solutions in Repair Welding for Power and Process Plants Bulletin / Circular by Welding Research Council, Inc., 1996 The Welding Research Council, Inc. Full Description Over the last 10 years oil, gas, petrochemical and power generation...
WRC 398 Reduction of S-N Curves for Ship Structural Details Bulletin / Circular by Welding Research Council, Inc., 1995 K. A. Stambaugh, D. H. Lesson, F. V. Lawrence, C. Y. Hou, G. Banas Full Description Cyclic loading causes fatigue cracking in a ship's welded...
WRC 399 The Influence of Consumable Composition and Solidification on Inclusion Formation and Growth in Low Carbon Steel Underwater Wet Welds Bulletin / Circular by Welding Research Council, Inc., 1995 A. Sanchez-Osio, S. Liu Full Description The use of...
WRC 402 Creep-Fatigue Damage Assessment in Type 316 Stainless Steel Under Uniaxial and Multiaxial Strain Cycling At 1150 Degrees F Bulletin / Circular by Welding Research Council, Inc., 1995 S. Y. Zamrik, M. Mirdamadi Full Description This report is the result...
WRC 406 Proposed Rules for Determining Allowable Compressive Stresses for Cylinders, Cones, Spheres and Formed Heads Bulletin / Circular by Welding Research Council, Inc., 1995 C. D. Miller, K. Mokhtarian Full Description The purpose of this report is to...
WRC 403 Part 1: Metallurgical Characterization of the HAZ in A516-70 and Evaluation of Fracture Toughness Specimens and the Effect of Shallow Cracks in Weldments and the Development of CTOD Criteria; Part 2: Comparison of the CTOD Fracture Toughness of Simulated and Weldment HAZ Regions Bulletin /...
WRC 407 Reports on Heat Treatment of Steels Used in Boiler and Pressure Vessel Applications: Part 1 & Part 2 Bulletin / Circular by Welding Research Council, Inc., 1995 C. D. Lundin, K. K. Khan, D. Yang; C. E. Spaeder Jr., W. D. Doty Full Description Part...
WRC Volume 50 No. 09-10 1995 Progress Reports Volume 50 No. 09-10 1995 Report / Survey by Welding Research Council, Inc., 1995 Welding Research Council, Inc. Full Description CONTENTSThis volume includes the full Minutes of the Executive Committee, Design...